Filter
Top Products
English
|
15
Installation of the
Microphone Unit
Check the installation position of the
microphone (accessory 5).
Remove oil and other dirt from the
installation surface.
Install the microphone.
Wire the cable up to the unit with it
secured at several positions using tape
or the like.
⁄
• Install the microphone as far as possible
from the cell-phone.
Peel the release coated
paper of double-face
adhesive tape to fix on the
place shown above.
Adjust the direction of the
microphone to the driver.
Fix a cable with a commercial item of tape.
Accessory5
Appendix
About Audio file
• Playable Audio file
AAC-LC (.m4a), MP3 (.mp3), WMA (.wma)
• Playable disc media
CD-R/RW/ROM
• Playable disc file format
ISO 9660 Level 1/2, Joliet, Romeo, Long
file name.
• Playable USB device
USB mass storage class
• Playable USB device file system
FAT16, FAT32
An online manual about
audio files is put on the site,
www.kenwood.com/cs/ce/audiofile/.
iPod/iPhone that can be connected
to this unit
Made for
• iPod touch (4th generation)
• iPod touch (3rd generation)
• iPod touch (2nd generation)
• iPod touch (1st generation)
• iPod classic
• iPod with video
• iPod nano (6th generation)
• iPod nano (5th generation)
• iPod nano (4th generation)
• iPod nano (3rd generation)
• iPod nano (2nd generation)
• iPod nano (1st generation)
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
For information on the compatibility of
iPod/iPhone software, visit www.kenwood.
com/cs/ce/ipod/.
KDC-X895, KDC-BT848U only