Kenwood KDC-X797 Stereo Receiver User Manual


 
English
|
5
Hands-free Phoning
Registering a Bluetooth device
1 Start registering this unit by
operating the Bluetooth device.
By operating the Bluetooth device,
register the hands-free unit or audio unit
(pairing).
Select “KDC-X7***” (for KDC-X797)/ “KDC-
BT7***HD” (for KDC-BT755HD) from the
list of found units.
If “PAIRING” appears, proceed to step 3.
2 Input the PIN code (“0000”) in the
Bluetooth device.
Check that registration is complete on
the Bluetooth device. PIN code is set to
“0000” as the default. You can change
this code. See <PIN CODE EDIT> (page
5).
3 Press the volume knob.
When registration is completed, “PAIRING
OK” appears.
Registration of iPod touch or iPhone
• This unit is compatible with an Apple
Auto Pairing function. Connecting the
iPod touch or iPhone to this unit with
a Dock Connector to USB cable will
automatically register it as a Bluetooth
device.
Error messages
• “DEVICE FULL”: 5 Bluetooth devices
have already been registered. No more
Bluetooth devices are registered.
• “PAIRING NG”: Pairing error.
Dialing a number in the phone book
To use the phone book it must have been
downloaded from the cell phone in advance.
1 Press [ Ú ] to enter Bluetooth mode.
2 Turn the volume knob to select
PHONE BOOK
, then press the knob.
3 Press [ 1 ] to enter alphabet search
mode.
4 Turn the volume knob to select the
character to be searched for.
To move to the next row, press [E]
/ [F].
To return to the Phone Book mode,
press [ 6 ].
5 Press the volume knob to start
searching.
6 Turn the volume knob to select a
name, then press the knob.
7 Turn the volume knob to select a
phone number.
8 Press the volume knob to make a
call.
Answering a Phone Call
Press [ Ú ] or press volume knob.
• The following operations disconnect the
line: Insert a CD. Connect a USB device.
• The name of the calling party is displayed
if it has already been registered in the
Phone Book.
Disconnecting a Call
Press [ Ú ] or [8SRC].
Adjusting the Voice Volume during
a Call
Turn the volume knob.
Bluetooth settings
1 Press [ Ú ] to enter Bluetooth mode.
2 Turn the volume knob to select
SETTINGS
, then press the knob.
3 Turn the volume knob to select
DETAILED SET
, then press the knob.
4 Turn the volume knob to select a
desired setting item, then press the
knob.
5 See table below for selection.
6 Hold [ 6 ] to finish the procedure.
Item Selectable setting (Preset: *)
PIN CODE
EDIT
Specify the PIN code required when registering
this unit using the Bluetooth device. By
default, “0000” is specified.
1. Turn the volume knob to select the number.
To move to the next digit, press [F].
To delete the last digit, press [
E
].
2. Press the volume knob to register a PIN
code
MIC GAIN -20 — 0 * — 8: Adjust the sensitivity of the
microphone for telephone call or adjusts the
voice of the caller.
ECHO
CANCEL
1 — 4 * — 10: Sets the echo cancellation
level.
• For details, see the Instruction Manual.
About the Cell-Phone
• Version:
Bluetooth Standard Ver. 2.1+EDR
Certified
• Profile:
HFP (Hands Free Profile)
SPP (Serial Port Profile)
OPP (Object Push Profile)
PBAP (Phone book Access Profile)
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio/Video Remote Control
Profile)
For the cell-phones verified for
compatibility, access the following URL:
www.kenwood.com/cs/ce/bt/
Volume knob
B59-2185-00_00_K.indb 5 12/11/27 8:43