Filter
Top Products
Before use
AWARNING
To
prevent injury or fire, take
the
following
precautions:
•
To
prevent a short circuit, never
put
or leave any
metallic objects (such
as
coins or metal tools) inside
the unit.
Before using this unit for
the
first
time
This
unit
is
initially set on the Demonstration mode.
When using this
unit
for the first time, cancel the
<Demonstration
mode
Setting> (page
14).
How
to
reset your
unit
• If this
unit
or the connected
unit
(disc auto changer,
etc.) fails
to
operate properly,
press
the
Reset
button.
The
unit
returns
to
factory settings
when
the
Reset
button
is
pressed.
~~~~J~//~~G
~d~·~{D~:\ill_Reset
button
Q
~
(!:7
Cleaning
the
Unit
If
the
faceplate
of
this
unit
is
stained,
wipe
it
with
a
dry
soft cloth such
as
a silicon cloth.
If
the
faceplate
is
stained badly,
wipe
the
stain
off
with
a cloth moistened
with
neutral cleaner, then
wipe
it
again
with
a clean soft
dry
cloth.
~
• Applying spray cleaner directly
to
the
unit
may affect its
mechanical parts. Wiping
the
faceplate
with
a hard cloth or
using a volatile liquid such
as
thinner or alcohol may scratch
the surface or
erases
characters.
Cleaning
the
Faceplate Terminals
If
the
terminals on the
unit
or faceplate
get
dirty,
wipe
them
with
a clean soft
dry
cloth.
Lens Fogging
When you turn on the car heater in cold weather,
dew
or condensation may form on the lens in the
CD
player
of
the unit. Called lens fogging, this
condensation on the lens may
not
allow
CDs
to
play.
In
such a situation, remove the disc and wait for the
condensation
to
evaporate. If the
unit
still does
not
operate normally after a while, consult your Kenwood
dealer.
• Ifyou experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check
with
your Kenwood dealer to make sure that they work
with
your model and in your
area.
• The characters which can be displayed by this
unit
are
A-Z 0-9 @ ", ' % & * + - = , .1 \ < >
[]
( ) : ;
/\
- { } I
• The illustrations
of
the display and the panel
appearing in this manual
are
examples used
to
explain more clearly
how
the controls
are
used.
Therefore,
what
appears on the display in the
illustrations may differ from
what
appears on the
display on
the
actual equipment, and some
of
the
illustrations on the display may be inapplicable.
Handling
CDs
• Do
not
touch the recording surface
of
the
CD.
• Do
not
stick tape etc. on the
CD,
or
use
a
CD
with
tape stuck on it.
• Do
not
use
disc type accessories.
• Clean from the center
of
the disc and move
outward.
• When removing
CDs
from this unit, pull them
out
horizontally.
•
If
the
CD
center hole or outside rim
has
burrs,
use the
CD
only after removing
the
burrs
with
a
ballpoint pen etc.
CDs
that
cannot be used
•
CDs
that are
not
round cannot be used.
®
•
CDs
with
coloring on the recording surface or
CDs
that
are
dirty
cannot be used.
• This
unit
can
only play
the
CDs
with.
1iI_
This
unit
may
not
correctly play discs which
do
not'
have the mark.
•
You
cannot playa
CD-R
or CD-RW that
has
not
been
finalized.
(For
the finalization process refer
to
your
CD-R/CD-RW writing software, and your CD-RlCD-
RW
recorder instruction manual.)
English
I 3