Filter
Top Products
English
|
47
Connecting Wires to Terminals
MUTE
EXT.
CONT
P.CONT
ANT.CONT
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
FRONT
SUB
WOOFER
AUX IN
REAR
Rear right output (Red)
Rear left output (White)
Front left output (White)
Front right output (Red)
Battery wire (Yellow)
Ignition wire (Red)
FM/AM antenna input
Antenna Cord (ISO)
Antenna Conversion Adaptor
(ISO–JASO) (Accessory3)
To connect the Kenwood navigation system, consult
your navigation manual.
Wiring harness
(Accessory1)
If no connections are made, do not
let the wire come out from the tab.
Power control/Motor antenna
control wire (Blue/White)
TEL mute wire (Brown)
Connect either to the power control terminal
when using the optional power amplifier, or to the
antenna control terminal in the vehicle.
Connect to the terminal that is grounded when
either the telephone rings or during conversation.
A-–7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
Fuse (10A)
See next page
To External Display/
Steering remote
External amplifier control wire
(Pink/Black)
To "EXT.AMP.CONT." terminal of the amplifier
having the external amp control function.
To Kenwood disc changer/
External optional accessory
To connect these leads, refer to
the relevant instruction manuals.
AUX right input (Red)
AUX left input (White)
Sub Woofer right output (Red)
Sub Woofer left output (White)
USB connector
Do not remove the cap
when you do not use the
USB cable. The connector
will cause the unit to
malfunction if it gets in
touch with any metallic part
of the vehicle.
To USB device