Kenwood KDC-U353 CD Player User Manual


 
8
Changing the frequency steps
(for )
You can change the frequency step of FM/ MW:
FM : 50 kHz to 200 kHz
MW : 9 kHz to 10 kHz
1
Press and hold SRC to turn off the power.
2
While pressing number buttons 1(–) and 5 (iPod) or 5, press SRC.
Release your fingers from the buttons after the display appears.
To restore the initial setting, repeat the same procedure.
When the frequency step is changed, the frequencies in the memory are deleted.
Adjust [SETTINGS] mode settings
While listening to the radio...
1
Press the volume knob to enter [FUNCTION] mode.
2
Turn the volume knob to select [SETTINGS], then press to enter.
3
Turn the volume knob to make a selection, then press to confirm.
See table below for selection.
4
Hold to finish the procedure.
Item Selectable setting (Preset: *)
LO.SEEK
LO.S ON: Searches only stations with good reception. (For
: MW/SW1/ SW2 stations only ; For : FM stations only.) ; LO.S OFF *:
Cancels.
SEEKMODE Selects the tuning mode for
4
/
¢
buttons.
AUTO1 *: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset
memory. ; MANUAL: Manually search for a station.
A-MEMORY <Y>/ N *: Automatically starts memorizing 6 stations with good reception. ; Y /<N>:
Cancels (automatic
memorizing is not activated). (Selectable only if [TYPE NML] is selected for [PRESET].) (page 6, 7)
MONO SET MONO ON: Improve the FM reception (but the stereo effect may be lost). ; MONO OFF *: Cancels (stereo
effect resumes).
PTY SRCH Selects the available Program Type (see table on page 9). Then, press
4
/
¢
to start searching.
Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language
(ENGLISH */ FRENCH/ GERMAN), then press to confirm.
TI TI ON: Allows the unit to temporarily switch to Traffic Information. ; TI OFF *: Cancels.
NEWS SET NEWS 00M – NEWS 90M: Sets the time for receiving the next news bulletin. ; NEWS OFF *: Cancels.
AF SET AF ON *: Automatically searches for another station broadcasting the same program in the same Radio Data
System network with better reception when the current reception is poor. ; AF OFF:
Cancels.
REGIONAL REG ON *: Switches to another station only in the specific region using the “AF” control. ; REG OFF: Cancels.
ATP SEEK ATPS ON *: Automatically searches for a station with better reception when the traffic information‘s
reception is poor. ; ATPS OFF: Cancels.
[PTY SRCH/ TI/ NEWS SET/ AF SET/ REGIONAL/ ATP SEEK] is selectable only for .
[MONO SET/ PTY SRCH] is selectable only when the source is “FM.”
[TI/ NEWS SET/ AF SET/ REGIONAL/ ATP SEEK] is selectable only when the source is “FM.” If other playback source is
selected, these settings are selectable under [TUNERSET] item. (page 15)
EN_KDC-U453[M]2.indd 8EN_KDC-U453[M]2.indd 8 9/6/11 5:42:59 PM9/6/11 5:42:59 PM