Filter
Top Products
14
Item
Selectable setting
Preset
EQ PRO
MID ADJ MID FRQ MID F0.5K/ MID F1.0K/ MID F1.5K/ MID F2.5K: Selects the
center frequency.
MID F2.5K MID F1.0K
MID LVL MID L –8 — MID L +8: Adjusts the level. MID L +2 MID L 0
MID Q MID Q0.75/ MID Q1.00/ MID Q1.25: Adjusts the quality factor. MID Q1.00
TRE ADJ TRE FRQ TRE 10.0K/ TRE 12.5K/ TRE 15.0K/ TRE 17.5K: Selects the
center frequency.
TRE 12.5K
TRE LVL TRE L –8 — TRE L +8: Adjusts the level. TRE L +3 TRE L 0
EQ NATURAL/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL: Selects
a preset sound mode suitable to the music genre. (Selects [USER] to use the
customized bass, middle, and treble settings.)
POWERFUL NATURAL
B. BOOST BB-L LV1/ BB-L LV2/ BB-L LV3: Selects your preferred bass boost level. ;
BB-L OFF:
Cancels.
BB-L LV1 BB-L OFF
LOUDNESS LOUD LV1/ LOUD LV2: Selects your preferred low and high frequencies boost to
produce a well-balanced sound at a low volume level. ; LOUD OFF:
Cancels.
LOUD OFF LOUD LV1
BALANCE BAL L15 — BAL R15: Adjusts the left and right speaker output balance. BAL 0
FADER FAD R15 — FAD F15: Adjusts the rear and front speaker output balance. FAD 0
SW SET SW ON: Turns on the subwoofer output. ; SW OFF:
Cancels. SW ON
DTIL SET
HPF HPF THRU: All signals are sent to the speakers ; HPF 100H/ HPF 120H/
HPF 150H: Frequencies lower than 100 Hz/ 120 Hz/ 150 Hz are cut off.
HPF THRU
LPF SW LPF THRU: All signals are sent to the subwoofer. ; LPF 85H/ LPF 120H/
LPF 160H: Frequencies higher than 85 Hz/ 120 Hz/ 160 Hz are cut off.
LPF THRU
SW PHASE PHAS REV
(180°)
/
PHAS NML
(0°)
:
Selects the phase angle of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [LPF THRU] is selected for [LPF SW].)
PHAS NML
SPRM SET SPRM ON: Creates realistic sound by interpolating the high-frequency
components that are lost in AAC/MP3/WMA audio compression. ;
SPRM OFF: Cancels. (Selectable only when playback an AAC/MP3/WMA disc
or a USB device.)
SPRM ON
V-OFFSET V-OFF –8 — V-OFF +8 (for AUX) ; V-OFF –8 — V-OFF 0 (for other sources)
:
Presets the volume adjustment level of each source. The volume level will
automatically increase or decrease when you change the source. (Before making
an adjustment, select the source you want to adjust.)
V-OFF 0
[HPF] is selectable only for
.
[SW LEVEL/ SW SET/ LPF SW/ SW PHASE] is selectable only if [SWPRE] is set to [SWPRE SW]. (page 6, 7)
[SW LEVEL/ LPF SW/ SW PHASE] is selectable only if [SW SET] is set to [SW ON].
EN_KDC-U453[M]2.indd 14EN_KDC-U453[M]2.indd 14 9/6/11 5:43:04 PM9/6/11 5:43:04 PM