Filter
Top Products
20
|
English
Menu system
In Standby mode
CD Read Setting
When there is a problem on playing a CD with
special format, this setting play the CD by force.
Display Setting
"CD READ 1" Play CD and Audio file.
"CD READ 2" Play CD by force.
• Setting "CD READ 2" cannot play Audio file.
Some music CDs may not be played back even in the
"CD READ 2" mode.
In Standby mode
Switches the NTSC/PAL setting
Switches to the NTSC broadcast mode or PAL
broadcast mode setting.
Display Setting
"PAL" Set this in the PAL broadcast mode area.
"NTSC" Set this in the NTSC broadcast mode area.
• The PAL or NTSC setup must match the setup of the
connected monitor unit. If they do not match, no
image can be played back.