Filter
Top Products
20
|
KDC-BT50U/ KDC-5047U/ KMR-440U
Function setting
58 Setting the Time Interval for Automatic
Answer: “Auto Answer” ➤ ”OFF”, “0SEC” – “8SEC”
– “99SEC”
This function automatically answers (responds
to) a call after lapse of the preset time interval for
automatic answer.
“OFF” : Does not answer the phone call
automatically.
“0” : Automatically answers the phone call at once.
“1s” – “99s” : Automatically answers the phone call
after lapse of 1 – 99 seconds.
59 Speaker Select: “Bluetooth HF/Audio” ➤ “Front”,
”All”
You can specify output speakers for hands-free
voice communication and Bluetooth audio sound.
“Front” : Outputs sound from the front speakers.
“All” : Outputs sound from the front and rear
speakers.
60 Setting the Beep of the Incoming Call: “Call
Beep” ➤ “ON”, ”OFF”
You can output a beep from the speaker when a
call comes in.
“ON” : Beep is heard.
“OFF” : Beep is canceled.
61 BT F/W Update: “BT F/W Update”
Displays the firmware version and update the
firmware. Refer to <Displaying the Firmware
Version> (page 31).
62 MIC Gain: “MIC Gain” ➤ “-3” – ”0” – “+3”
Adjusts the sensitivity of the built-in microphone
for a telephone call. Adjust the voice of caller.
Setting to “+” increases the voice volume.
Function of the KDC-BT50U.
63 Noise Cancel: “NR Level” ➤ “-3” – ”0” – “+3”
Reduces the noises generated by surrounding
environment without changing the built-in
microphone volume. Adjust the voice of caller
when it is not clear. Setting to “+” increases the
noise reduction.
Function of the KDC-BT50U.
64 Echo Cancel Level: “Echo Cancel” ➤ “-2” – ”0”
– “+2”
Sets the echo cancellation level.
Function of the KDC-BT50U.
65 MIC Select: “MIC Select” ➤ “Builtin”, ”External”
Determines whether the built-in or external
microphone is to be used when the receiver
incorporates a microphone.
Builtin: Use the built-in microphone.
External: Use the external microphone.
Function of the KDC-BT50U.
Function list
Function items that appear when any
source is selected
Function item list No.
“Settings” “Clock & Date” “Clock Adjust”
12
“Time Synchronized”
13
“Date Adjust”
14
“Date Mode”
15
“DISP & ILLUMI” “Color SEL”
16
“DISP OFF Mode”
17
“Display Dimmer”
18
“Text Scroll”
19
“BT DVC Status”
20
“ILLUMI Dimmer”
21
“ILLUMI Effect”
22
“ILLUMI Music SYNC”
23
“Display Control” (“DISP SELECT”)
08
“DISP Side Select”
09
“DISP Text Select”
10
“DISP GRPHC Select”
11
“DEMO Mode”
47
Function items that appear during
standby
Function item list No.
“Initial Settings” “SRC Select”
36
“Key Beep”
37
“Russian”
38
“Function Language”
39
“Power OFF Wait”
40
“Built-in AUX”
41
“CD Read”
42
“Favorite Delete”
43
“Built-in AMP”
44
“Speaker Select”
45
“F/W Update #.##”
46