Filter
Top Products
24
|
English
Menu system
Synchronize Clock
Synchronizing the RDS station time data and this
unit’s clock.
Display Setting
"SYNC ON" Synchronizes the time.
"SYNC OFF" Adjust the time manually.
• It takes 3 to 4 minutes to synchronize the clock.
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the
faceplate is removed, warning potential thieves.
Display Setting
"DSI ON" LED flashes.
"DSI OFF" LED OFF.
Selectable Illumination
Selecting the button illumination color as green
or red.
Display Setting
"Color Red" The illumination color is red.
"Color Green" The illumination color is green.
Switching Display Type
Setting the Display type.
Display Setting
"DisplayC" Demonstration.
"DisplayA" Normal display type.
"DisplayB" Silent display type.
Function of the KDC-WV6027
Illumination Color Setting
You can set the display to a desired color.
1 Select Illumination Color Setting Mode
Press the [FM] or [AM] button.
Select the "COL" display.
2 The color continues to change gradually
Hold down on the [4] or [¢] button.
Release your finger at the color you want.
•
Colors adjusted using either [4] or [¢] will be
stored automatically, and they can be called by
pressing [5] button.
Quick call up the preset color
Press the desired [1] — [4] button.
Button Color
[1] Silky White
[2] Red
[3] Blue
[4] Blue Green
Selecting the Color mode
Press the [6] button.
Each time the button is pressed the Color mode
switches as shown below.
Display Color mode
"Scan" The color changes in sequence.
"SRC" The color changes according to the selected source.
"Time" The color changes every 6 hours.
Keeps the presently set color.
Blue fine adjustment
1 Press the [3] button for at least 2 seconds.
2 Press the [4] or [¢] button.
When the blue fine adjustment is completed,
press the [3] button.