Filter
Top Products
6
|
English
Notes
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off
with a cloth moistened with neutral cleaner, then
wipe neutral detergent off.
• Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth
or using a volatile liquid such as thinner or alcohol may
scratch the surface or erases characters.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty,
wipe them with a dry, soft cloth.
Cleaning the CD Slot
As dust tends to accumulate in the CD slot, clean it
every once in a while. Your CDs can get scratched if
you put them in a dusty CD slot.
The marking of products using lasers
(Except for some areas)
CLASS 1
LASER PRODUCT
The label is attached to the chassis/case and says
that the component uses laser beams that have
been classified as Class 1. It means that the unit
is utilizing laser beams that are of a weaker class.
There is no danger of hazardous radiation outside
the unit.
WOW, SRS and
symbol are trademarks of SRS
Labs, Inc.
WOW technology is incorporated under license
from SRS Labs, Inc.
Dolby Pro Logic II
The matrix decoding technologies that have been
evolved from the conventional Dolby Pro Logic
system and that is based on the latest digital matrix
technologies. It realizes the excellent 5.1-channel
sound playback of Dolby Surround and ordinary CD
stereo sounds. You can enjoy surround channels as
full-band sounds (from 20 Hz to 20 kHz) and stereo
sources as real 5.1-channel sounds. The Movie
mode, Music mode, Matrix mode, can be selected
according to the playback source. When the Dolby
Pro Logic II mode is selected, the sound level is
slightly dropped due to its characteristics.
Manufactured under license from Dolby
Laboratories.
"Dolby", "Pro Logic", and the double-D symbol
are trademarks of Dolby Laboratories.
About RDS
RDS (Radio Data System)
When listening to an RDS station, the program
service name of the station is displayed, advising
you quickly which station is being received.
RDS (Radio Data System) stations also transmit
frequency data for the same station. When you
are making long trips, this function automatically
alternative switches to the particular frequency
with the best reception for the particular network
of stations that you want to listen to. The data is
automatically stored, allowing you to switch quickly
to another RDS stations, broadcasting the same
program, that has better reception. These include
stations stored in the station preset memory that
you often listen to.
Enhanced Other Network
Stations that offer <Enhanced Other Network> also
transmit information about other RDS stations that
have traffic information. When you are tuned to a
station that is not transmitting traffic information,
but another RDS station starts transmitting a traffic
bulletin, the tuner automatically switches to the
other station for the duration of the bulletin.
Alarm
When an emergency transmission (announcing
disasters, etc.) is sent, all current functions are
interrupted to allow the warning to be received.