Filter
Top Products
Displaying the program service name and selecting the station.
1 Enter SNPP mode
Press the [DNPP] button on the remote.
When "SNPP" is displayed, the program service name displays
the FM1, FM2, FM3 and AM band in order.
For stations without a program service name the frequency is
displayed instead.
Changing the display order
Press the [4] or [¢] button.
Changing the displayed band
Press the [FM] or [AM] button.
2 If the station you want is displayed
Press the [OK] button on the remote.
The station for the program service name being displayed is
received.
Canceling the SNPP mode
Press the [DNPP] button on the remote.
SNPP (Station Name Preset Play)
(Function of Remote)
Calling up the stations in the memory.
1 Select the band
Press the [FM] or [AM] button.
2 Call up the station
Press the [#1/5] — [#4/8] button.
The stations are called up as shown below.
Press button Call up number
[#1/5] No.1 No.5
[#2/6] No.2 No.6
[#3/7] No.3 No.7
[#4/8] No.4 No.8
Each time the button is pressed, the called up station switches
cyclically.
j
j
j
j
Preset Tuning
•When the <AF Function> (page 35) is ON, only RDS stations are
put in the memory.
• When Auto Memory Entry is done with the FM2 band, the RDS
stations preset in the FM1 band aren't put in the memory.
Likewise, when it is done with the FM3 band, RDS stations preset
in FM1 or FM2 aren't put in the memory.
8 stations can be put in the memory on each band.
— 19 —
KDC-M907 _U.S 04.2.4 4:17 PM Page 19