Filter
Top Products
Attaching a title to a CD.
1 Play the disc you want to attach a name to
•A title can't be attached to a MD.
• Refer to the <Switching Display> (page 10) and select the "DNPS"
display.
2 Enter name set mode
Press the [NAME.S] button for at least 2 seconds.
"NAME SET" is displayed.
3 Move the cursor to the enter character position
Press the [4] or [¢] button.
4 Select the character type (KDC-M6024G/M6024/V6524/6024
only)
Press the [38] button.
Each time the button is pressed the character typed switches as
shown below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
5 Select the characters
Press the [FM] or [AM] button.
6 Repeat steps 3 through 5 and enter the name.
7 Exit name set mode
Press the [NAME.S] button.
Disc Naming (DNPS)
Canceling the Folder Select mode
Press the [F.SEL] button.
Function of the KDC-M6024G/KDC-M6024
Quickly selecting the folder you want to listen to.
1 Enter Folder Select mode
Press the [F.SEL] button.
"F" is displayed.
During Select mode the folder information is displayed as shown
below.
<Folder name display>
Displays the current folder name.
2 Select the folder level
Press the [FM] or [AM] button.
With the [FM] button you move 1 level down and with the [AM]
button 1 level up.
Selecting a folder in the same level
Press the [4] or [¢] button.
With the [4] button you move to the previous folder, and with
the [¢] button to the next folder.
Returning to the top level
Press the [3] button.
3 Decide the folder to play
Press the [38] button.
The Folder Select mode releases, and the MP3 in the folder
being displayed is played.
The methods for moving to other folders in the folder select mode
are different from those in the folder search mode.
See <Notes on playing MP3> (page 6) for details.
Folder Select (Function of MP3)
CD/MP3/External disc control features
— 22 —
English
KDC-M6024G_U.S r4 02.10.31 11:46 AM Page 22