Kenwood KDC-4051UR Stereo System User Manual


 
14
Item Selectable setting (Preset: *)
MID ADJUST MIC CTR FRQ/ MID C FRQ: 0.5K/ 1.0K */ 1.5K/ 2.5K:
Selects the center frequency.
MID LEVEL: –8 — +8 (Preset: 0):
Adjusts the level.
MID Q FACTOR/ MID Q FCTR: 0.75/ 1.00 */ 1.25:
Adjusts the Q factor.
TRE ADJUST TRE CTR FRQ/ TRE C FRQ: 10.0K/ 12.5K */ 15.0K/ 17.5K:
Selects the center frequency.
TRE LEVEL: –8 — +8 (Preset: 0):
Adjusts the level.
BALANCE L15 — R15 (Preset: 0): Adjusts the left and right speaker output balance.
FADER R15 — F15 (Preset: 0): Adjusts the rear and front speaker output balance.
SUBWOOFER SET/ SUB-W SET ON *: Turns on the subwoofer output. ; OFF:
Cancels.
DETAILED SET/ DETAIL SET
LPF SUBWOOFER/
LPF SUB-W:
THROUGH *: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/ 160HZ: Frequencies higher
than 85 Hz/ 120 Hz/ 160 Hz are cut off.
SUB-W PHASE: REVERSE/ REV
(180°)
/
NORMAL/ NORM
(0°)
*
:
Selects the phase angle of the subwoofer
output to be in line with the speaker output for optimum performance. (Selectable only if a
setting other than [THROUGH] is selected for [LPF SUBWOOFER/ LPF SUB-W].)
SUPREME SET: ON *: Creates realistic sound by interpolating the high-frequency components that are lost in
AAC/ MP3/ WMA audio compression. ; OFF: Cancels. (Selectable only when playback an AAC/
MP3/ WMA disc or a USB device, except iPod.)
VOLUME OFFSET/
VOL OFFSET:
(Preset: 0)
–8 — +8 (for AUX) ; –8 — 0 (for other sources)
:
Presets the volume adjustment level of
each source. The volume level will automatically increase or decrease when you change the
source. (Before making an adjustment, select the source you want to adjust.)
Select a source before making a source tone memory adjustment, [BASS ADJUST/ MID ADJUST/ TRE ADJUST].
KDC-4051UG/ KDC-4051UR/ KDC-415UA/ KDC-415UR/ KDC-4251URY/ KDC-4551UB/ KDC-455UW/ KDC-4651URY
only:
[SUB-W LEVEL/ SUBWOOFER SET/ SUB-W SET/ LPF SUBWOOFER/ LPF SUB-W/ SUB-W PHASE] is selectable only if
[SWITCH PREOUT/ SWITCH PRE] is set to [SUB-W]. (page 4)
[SUB-W LEVEL/ LPF SUBWOOFER/ LPF SUB-W/ SUB-W PHASE] is selectable only if [SUBWOOFER SET/ SUB-W SET] is
set to [ON].
[SETTINGS]
Item Selectable setting (Preset: *)
AUX NAME SET/
AUX NAME
AUX */ DVD/ PORTABLE/ GAME/ VIDEO/ TV: Selects the desired name for the connected component.
(Selectable only if “AUX” is selected as the source.)
CLOCK CLOCK ADJUST/ CLOCK ADJ: (For details, see page 7.)
TIME SYNC: ON *: Synchronizes the Radio Data System station time data and the unit’s clock. ;
OFF: Cancels.
DISPLAY DIMMER SET: ON: Dims the display illumination. ; OFF *: Cancels.
TEXT SCROLL: AUTO/ ONCE: Selects to scroll the display information automatically, or scroll only once. ;
OFF *: Cancels.
RDS SET NEWS SET/ AF SET/ RDS REGIONAL/ RDS REG/ AUTO TP SEEK/ ATP SEEK: Selectable only if any source
other than tuner source is selected. (For details, see page 8, 9.)
EN02-21_KDC-4051UG[E]f.indd 14EN02-21_KDC-4051UG[E]f.indd 14 9/21/10 5:21:34 PM9/21/10 5:21:34 PM
130.com.ua
Autogood products Internet store “130”