Filter
Top Products
7
ENGLISH
Continued...
Item Selectable setting (Preset: *)
PRESET TYPE NORMAL/ NORM *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/
LW/ SW1/ SW2). ; MIX: Memorizes one station for each preset button regardless of the selected band
(FM1/ FM2/ FM3/ MW/ LW/ SW1/ SW2).
KEY BEEP ON */ OFF: Activates/deactivates the keypress tone.
TDF ALARM ON: Activates the alarm if you forgot to detach the faceplate when ACC is set to OFF. ; OFF *: Cancels
RUSSIAN SET ON: Folder name, file name, song title, artist name, album name are displayed in Russian (if applicable). ;
OFF *: Cancels.
P-OFF WAIT Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery.
–––– : Cancels ; 20M *: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes
BUILT-IN AUX/
BUILTIN AUX
ON1 *: Outputs sound of the connected external component through the car speakers when “AUX” is
selected as the source. ; ON2: Outputs sound from the connected external component when “AUX” is
selected as the source. When you turn on the power, the sound attenuates (to prevent noise when no
external component is connected). Turn the volume knob clockwise to return to the previous volume level. ;
OFF: Disables “AUX” in source selection.
CD READ 1 *: Automatically distinguishes between audio file disc and music CD. ; 2:
Forces to play as a music CD. No
sound can be heard if an audio file disc is played.
SWITCH PREOUT/
SWITCH PRE
REAR */ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on
the rear of the unit (through an external amplifier).
SP SELECT OFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance.
F/W UP xx.xx YES: Starts upgrading the firmware. ; NO *:
Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
[TDF ALARM] is selectable only with KDC-U449/ KDC-U3049/ KDC-U349.
[RUSSIAN SET/ P-OFF WAIT] is selectable only with KDC-4051UM.
Listening to the radio
KDC-4051UM:
Hold to turn on or off the Traffic Information function
(not applicable if “MW/ LW” is selected).
Hold for about 2 seconds to memorize the current station (or the selected Program Type for
KDC-4051UM
). (Refer to [PTY SEARCH] on page 8 to select the Program Type.)
Press briefly to recall memorized station (or Program Type after entering the PTY search
mode for
KDC-4051UM
).
1
Press SRC to select “TUNER.”
2
Press BAND repeatedly to select a band (FM1/ FM2/ FM3/ MW/ LW/ SW1/ SW2).
3
Press 4
/
¢ to search for a station.
EN02-19_KDC-U449[M]4.indd 7EN02-19_KDC-U449[M]4.indd 7 9/7/10 10:43:30 AM9/7/10 10:43:30 AM