Filter
Top Products
16
|
English
Menu system
In Standby mode
Contrast Adjustment
Adjusting the display contrast.
Display and Setting
"Contrast 1"
…
"Contrast 7" (Original setting)
…
"Contrast 11"
In Standby mode
Selecting display mode
The sound quality can be improved by turning off
the regular displays.
Display Setting
"Display On" Display is turned on
"Display Off" Display is turned off
• Even though during Display off, the display appears if
you do an operation, or the track of CD is changed.
In Standby mode
Security Code
Because authorization by the Security Code is
required when it’s removed from the vehicle,
personalizing this unit is by using the Security
Code is a help in preventing theft.
• When the Security Code function is activated, the code
can’t be changed and the function can’t be released.
Note, the Security Code can be set as the 4 digit number
of your choice.
1 Select the Security Code mode
Press the [FM] or [AM] button.
Select the "CODE STANDBY" display.
2 Enter Security Code mode
Press the [FNC] button for at least 1 second.
"CODE ****" is displayed.
3 Enter the Security Code
Press the [1] — [4] button.
Example: If the Security Code is "3510".
Step Button Times pressed Display
1
[1] 4
"3"
2 [2] 6 "5"
3 [3] 2 "1"
4 [4] 1 "0"
4 Confirm the Security Code
Press the [FNC] button.
"CODE **** 1" is displayed.
5 Do the steps 3 through 4, and reenter the
Security Code.
The Security Code function activates.
• When a Code different from step 3 is entered, repeat
from step 3.
Press the Reset button and when it’s removed
from the battery power source
1 Turn the power ON.
2 Do the step 3 through 4 operation, and enter
the Security Code.
"CODE OK!" is displayed.
The unit can be used.
In Standby mode
Touch Sensor Tone
Setting the operation check sound (beep sound)
ON/OFF.
Display Setting
"Beep On" Beep is heard.
"Beep Off" Beep canceled.