Kenwood KAF-3030R Stereo Amplifier User Manual


 
7
KAF-3030R/1030 (En)
The system control operations
Remote Control
The remote control supplied with this unit can also be used to control the other components in the system.
Automatic Operation (except [XR] and [XS-8] equipment)
When you start playback from a source component, the input selector on this unit switches to that component
automatically.
Synchronized Recording (except [XR] and [XS-8] equipment)
Lets you synchronize recording with the start of playback when recording from CD or MD.
The system control connections (KAF-3030R only)
1. [SL16] equipment cannot be combined with [XR], [XS], and [XS8] equipment for
system operations. If your equipment consists of this kind of combination, please
do not connect any system control cords, Even without system control cords,
normal operations can be carried out without affecting performance.
2. If your amp or receiver does not have a system control terminal, do not connect
any system control cords to the system control terminals on the other compo-
nents.
3. Do not connect system control cords to any components other than those speci-
fied by KENWOOD. It may cause a malfunction and damage your equipment.
4. Be sure the system control plugs are inserted all the way in to the system control
terminals.
NotesNotes
Notes
SYSTEM CONTROL CONNECTIONS
Connecting system control cords after connecting a KENWOOD
audio component system lets you take advantage of conve-
nient system control operations.
This unit is compatible only with the [SL16] mode. The sys-
tem control operation is not available if the unit is connected
in the [XS-8] connection mode.
Note
Adv. DA / CD inputs:
For SYSTEM CONTROL connection of a CD player.
MD / CD-R inputs:
For SYSTEM CONTROL connection of an MD player.
•Do this operation after completing all connections.
(Ensure that the power plug is not connected.)