Filter
Top Products
G-EQ300 (En/K)
10
Display
2
Select the desired display mode.
2.5k 3.9k 6.3k 10k 16 k400 625 1k 1.5k25040 63 98 160
Graphic equalizer display mode
Shows how each frequency range is compensated.
The graphic equalizer display also appears for about 5 seconds, even
while the unit is in the spectrum analyzer display mode, when one of
the following operation is performed.
1. Turning the unit ON.
2. An operation key associated with an equalizer operation is pressed.
DEMO(Demonstration) mode
After “DEMO” is displayed, the demonstration of the graphic equalizer
curves starts.
2.5k 3.9k 6.3k 10k 16 k400 625 1k 1.5k25040 63 98 160
Peak hold level
Spectrum analyzer display mode
Displays the frequency distribution of the source being played to allow
under standing at a glance.
The peak value of the varying level of each frequency range is held and
displayed for about 0.5 second.
Each press switches the display modes as follows.
1 Graphic equalizer display mode
2 Spectrum analyzer display mode
3 DEMO(Demonstration) mode
1
Press the ON/STANDBY key to turn the unit ON.
Switching the display modes
: Keys and control used in the operations described on this page.
ON/STANDBY
DISPLAY
Preparation
¶Ensure that the MAIN POWER key is set to
ON.
MAIN POWER
-ON –OFF