Filter
Top Products
G-EQ300 (En/K)
3
Special features
The large FL display, 14-band equalizer and 27-spectrum analyzer features
high visibility of information and make it possible to set EQ (equalizer) curves
with high accuracy.
Large FL display, 14-band equalizer
and 27-spectrum analyzer
MANUAL: Five preset patterns have been factory-preset for this mode, too. In
this mode, it is also possible to preset (assign) equalizer patterns
created by the user in place of the factory presets. @
REFERENCE: Five exemplary patterns have been preset at the factory. #
MANUAL/REFERENCE modes
Introduction
PARAMETRIC: Equalizer curves can be created by setting up to 3 center
frequencies and the equalizing levels for them. %
GRAPHIC: The equalizer curve can be adjusted in a detailed way for every
frequency range. It is also possible to fine-adjust a curve which
has been created in the PARAMETRIC mode. The GRAPHIC
mode is to be used when detailed adjustment of acoustic
compensation is required. &
PARAMETRIC/GRAPHIC modes
GENRE mode
A total of 30 playback patterns have been factory-preset by combining five
recommended equalizer patterns with six music genres, so that any of them
can be selected by actually comparing them. Similarly, selection from 30
types of recording patterns for playback on car stereo or from 30 types of
recording patterns for playback on headphone stereo is also available. Select
the optimum equalizer pattern according to the music genre and purpose of
use of the pattern. (
Accessories
Demonstration method ........................................................... 11
Operation of graphic equalizer ............................................... 12
Operation of MANUAL feature ............................................... 12
Operation of REFERENCE feature ........................................... 13
Equalizer pattern list ............................................................... 14
Creation of desired equalizer patterns .................................. 15
Operation in PARAMETRIC mode ........................................... 15
Operation in GRAPHIC mode .................................................. 17
Registration of EQUALIZER pattern ........................................ 18
Operation of GENRE feature ................................................... 19
REVERSE key ........................................................................... 20
Use of equalizer effect with tape ........................................... 21
Applying equalizer effect to tape playback ............................ 21
Tape recording of sound with equalizer effect ....................... 22
Functions of the graphic equalizer......................................... 23
In case of difficulty.................................................................... 24
3
Specifications ............................................................................ 25
Check that the following accessories are present.
Contents
Caution : Read the pages marked carefully to ensure safe operation.
Audio cord (2)
* AC plug adaptor (1)
System control cord (1)
*Use to adapt the plug on the
power cord to the shape of
the wall outlet. (Accessory
only for regions where use is
necessary.)
Introduction .................................................................................. 2
3
Before applying power.............................................................. 2
3
Safety precautions .................................................................... 2
Special features ........................................................................ 3
3
Contents .................................................................................... 3
Accessories ............................................................................... 3
3
IMPORTANT SAFEGUARDS ....................................................... 4
Before operation .......................................................................... 6
Safety precautions .................................................................... 6
Maintenance ............................................................................. 6
Names and functions of parts ................................................... 7
System connections .................................................................... 8
About the system control connections ..................................... 9
Display ......................................................................................... 10
Switching the display modes.................................................. 10