Filter
Top Products
11
CD-224M/DPF-J5010 (En)
: Keys and controls used in the operations described on this page.
Preparation
Notes
Notes
DD SI CCERDANI3G
MODE
SET
∞ DISC SKIP 5
LAL ADATRAE3D
DD SI CCERDANI3G
0D10:: DCTAXE3T
Disc replacement
Discs can be replaced with the same procedure as “Loading discs
in the carousel”. In stopped condition, all discs can be exchanged.
However, when the door panel is opened while “DISC DETEC-
TION” is being displayed, it may not be possible to remove the
disc which had been played. Accordingly, wait for the “DISC
DETECTION” indication to go out before opening the door panel.
When the disc information has been read in at the time of regis-
tration of disc information like title name, music type, etc., the
disc information can be recalled even when the disc insertion
place is changed.
)¢
÷When a title name has been registered and the door panel is closed,
reading operation is performed automatically.
The display flashes.
In regard to ALL DATA READ mode
The disc information for all discs will be read. It is convenient to
execute this mode before playback after discs have been exchanged.
Close the door panel before operation.
1 Press the MODE key.
2 Select “ALL DATA READ”.
3 Set the input.
Each press switches the modes as follows:
1 MUSIC TYPE
2 TITLE INPUT
3 ALL DATA READ
4 ALL INFORMATION
Search in progress or
reading information
The display flashes.
When the disc is CD-TEXT
÷ Repeat the above procedure so that the complete disc information is
read into the CD player.
÷ In the case of a non-CD-TEXT disc, the “D001:NO CD TEXT” display
will appear for approx. 3 seconds.
1. Please remove all CDs from the carousel before moving the unit.
2. In case of blinking indication of “DISCXXX ERROR”, open the door panel, confirm that the error disc has come to the center position, and
then exchange the error disc.
4
Close the door panel.
To quit ALL DATA READ mode
Press the 7 key.