38
7
While in Channel Display mode, you cannot activate the
following functions:
•VFO Mode
•VFO Scan
•Call/VFO Scan
• MHz Scan
•Scan Direction
•Memory Store
•Memory to VFO Transfer
•Memory to Memory Transfer
•Clear Memory Channel
•VFO Reset
• Full Reset
•1 MHz Step
•Selection for Tone and Selective Call
•Auto Simplex Checker
•Menu Mode
To recover normal operation, turn the transceiver power
OFF and press [REV]+[ ] again.
Note:
◆ To enter the Channel Display Mode, you must have at least one
Memory Channel that contains data.
◆ If the Memory Channel contains a Memory Name, the Memory
Name is displayed in place of “CH”.