Jwin JX-CD 650J CD Player User Manual


 
98
x3x3
Plays the first 10 seconds of each track on the disc.
INTRO
When in the STOP mode, press the MODE button three times and then
press the PLAY/PAUSE button to start INTRO playback.
During disc playback press the MODE button three times and then press
the back skip button to start INTRO playback . Alternatively
INTRO will start at the end of the current playing track.
This allows selected tracks on the disc to be played in any desired order.
Program can only be set in the STOP
mode.
1. Press the PROG button when the
unit is in the stop mode.
The track number and indicator
appear in the display.
2. Press or to select the desired
track.
3. Press the PROG button to enter the track
into memory.
4. Repeat step 2 and 3 to program
up to 24 tracks into memory.
5. Press to start the programmed play.
6. To erase the program, simply press the
STOP button twice.
PROGRAM
To program tracks
PROG
INTRO SCAN AND PROGRAMMED TRACK PLAY
PROG
x1x1
During playback During playback
MODEMODE
SKIP AND SEARCH FUNCTIONS
Locating a Particular track
To skip back to the beginning of the
current or a previous track
To skip to the beginning of following
tracks
Press lightly and repeatedly.
Press lightly and repeatedly.
Locating a Particular Point in a track
To search back at a high speed
To search forward at a high speed
Keep depressed
Keep depressed
Enables all the tracks on a disc to be played in a Random ( Shuffle ) sequence.
For example : If "RAND is selected while playing track 8, the random function
will commence once track 8 has ended.
When all tracks on a disc have been played the player will automatically stop
and power down in approx. 1 minutes to preserve battery life.
"
RAND
Low level audio will be heard during the search process to assist in
locating correct point in the track.
RANDOM PLAY
Press MODE button again to return to the NORMAL play mode.
During playback During playback
MODEMODE
x4x4
Track no. of the first
desired selection
The second selection
INTRO
PROG
PROG
PROG
RAND