Jwin JX-CD678 CD Player User Manual


 
EN-1
SAFETY PR ECA UTION
1. As the laser beam used in this compact disc player is harmful to the eyes, do not attempt
to disassemble the casing.
2. Stop operation immediately if any liquid or solid object should fall into the cabinet. Unplug
the unit and have it checked by qualified personnel.
3. Do not touch the lens or poke at it. If you do, you may damage the lens and the player
may not operate properly.
4. Do not put anything in the safety slot. If you do, the laser diode will be ON when the lid
is still opened.
5. If the unit is not to be used for a long period of time, make sure that all power sources
are disconnected from the unit. Remove all batteries from the battery compartment, and
unplug the AC adaptor from the wall outlet. Make it a practice to remove the AC adaptor by
grasping the main body and not by pulling the cord.
6. This unit employs a laser. The use of controls or adjustment or performance of
procedures other than those specified herein may result in exposure to hazardous radiation.
Warning:
The apparatus should not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the apparatus.
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified person-
nel only.
COMPLIANCE WITH FCC REGULATIONS
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful Interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures :
Reorientate or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio technician for help.
CLASS 1 LASER PRODUCT
This product contains a low power laser device.
CL ASS 1 LASER PRODUC T
APPAREIL LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
CAUTION
INVISIBLE LASER RADIATION
WH EN O PEN AND INT ERLO CKS
DEFEATED.
AVOID EXPOSURE TO BEAM