Jwin i177 Stereo System User Manual


 
Stereo Audio System for Your iPod V10M10_IM_EN_10192006
www.i-Luv.com
- 11 -
GETTING STARTED
Setting the Clock
1. To set the time, locate the TIME SET button. Press and hold the TIME SET button down until the display begins to flash. Rotate the SEARCH wheel
until the desired time is displayed. Time is displayed in the 12-hour format. An icon to the right of the display indicates PM, but there is no AM indicator.
2. To secure the time setting, press the TIME SET button again to confirm.
3. To set the correct year, you may either rotate the SEARCH wheel until the present year is displayed or press the TIME SET button initially to accept the
current setting. Press the TIME SET button again to secure year setting.
4. Once the first three steps are complete, the date display will be flashing in the lower right corner of the display. Press the TIME SET button to accept
the current setting or turn the SEARCH wheel until the current date is displayed. Press the TIME SET button to secure date setting.
Setting the Alarm
This unit supports two alarm settings for dual alarm feature.
1. To set the Alarm, press and hold the ALARM 1 or the ALARM 2 button until the display begins to flash. Rotate the SEARCH wheel until the desired
alarm time is displayed, an icon to the right of the time will light up indicating PM, but there is no indicator for AM.
2. Press the WAKE TO button and select the option for desired alarm sound source: iPod, radio or buzzer.
3. Press the ALARM 1 or ALARM 2 button to pre-set the volume level when the Alarm(s) is(are) activated. Use the VOLUME wheel to adjust the volume
level from 10 to 40. When the Alarm(s) is(are) activated, the volume will gradually rise from low to the pre-set setting.
4. Press the ALARM 1 or ALARM 2 button again to exit the alarm setting mode.
Notes:
With the Alarm set, the i177 is now activated to wake you up. To ensure this setting, check to see if the alarm and wake icons appear on the display.
Take notice of the adjusted volume level and make sure it is set at an appropriate level for waking up.