Filter
Top Products
17
English
■■
Using External Equipment
REMOTE CONTROL RM-RXUV5R
DIMMER SLEEP
DISPLAY FM MODE MD/AUX
AHB PRO
AUTO
PRESET
CD
PROGRAM RANDOM REPEAT
BASS TREBLE CANCEL
PTY/EON
UP
SET
DOWN
TUNER
BAND
TAPE
VOLUME
CD
DISPLAY MODE
TAPE TUNER CD
CD
OPEN/CLOSE
PHONES
MD/AUX
BAND
STANDBY/ON
DOWN UPMULTI CONTROL
MD/AUX
MD/AUX
You can listen to external equipment such as MD recorder, turntable, etc.
■
First make sure that the external equipment is properly connect-
ed to the System. (See page 4).
■
1. Set the VOLUME control to the minimum
position.
■
2. Press the MD/AUX button.
“AUX” appears on the display.
■
3. Start playing the external equipment.
■
4. Adjust the VOLUME control to the desired
listening level.
■
5. Apply sound effects, if you wish.
■
Press the AHB PRO button to reinforce the bass sound.
■
Press the BASS/TREBLE button on the Remote Control to con-
trol the tone. (See “Tone Control” on page 7.)
To exit MD/AUX mode, you will automatically switch out of
MD/AUX mode when you select another source.
Note:
For operation of the external equipment, refer to its Instruc-
tions.
You can record the System’s source to external equipment which is
connected to the LINE OUT or OPTICAL DIGITAL OUT termi-
nals of the System, such as cassette deck, MD recorder, etc.
■
First make sure that the external equipment is properly connect-
ed to the System. (See page 4).
■
1. Play the System’s CD Player, Cassette
Deck, or tune into a station.
■
The recording level is not affected by the VOLUME level set by
the System. Also it is not affected by the sound effects.
Note:
For operation of the external equipment, refer to its Instruc-
tions.
Listening to External
Equipment
Recording the System’s
source to External Equipment
01 UX-V55R(E)-eng.fm Page 17 Friday, June 11, 1999 11:33 AM