35
Timer Operations
Setting the Timer
Using Daily Timer, you can wake up with your favorite
music. On the other hand, with Recording Timer, you can
make a tape of a radio broadcast automatically.
• You can store three Daily Timer settings and one
Recording Timer setting; however, you can activate only
one of Daily Timers or Recording Timer at the same time.
• To exit from the timer setting, press CLOCK/TIMER as
required.
• To correct a misentry during the process, press CANCEL.
You can return to the previous step.
1
Select one of the timer setting modes you want to set—
Daily 1 ON time, Daily 2 ON time, Daily 3 ON time, or
Recording Timer ON time.
• When the clock has not been adjusted, pressing
CLOCK/TIMER makes the System enter the clock
setting mode.
2
Make the timer setting as you want.
Repeat the following operations until you finish setting in
the following order—
1
Set the hour then minute for on-time.
2
Set the hour then minute for off-time.
CLOCK/
TIMER
STANDBY/
ON
SET
CANCEL
,
Remote control
Timer initial settings when shipped from the factory:
• DAILY 1:ON Time (6:00)/OFF Time (8:00)/
Source (TUNER FM 1)/Volume level (– –)
• DAILY 2:ON Time (12:00)/OFF Time (14:00)/
Source (TUNER FM 1)/Volume level (– –)
• DAILY 3:ON Time (18:00)/OFF Time (20:00)/
Source (TUNER FM 1)/Volume level (– –)
• REC TMR:ON Time (8:00)/OFF Time (10:00)/
Source (TUNER FM 1)
Remote
ONLY
CLOCK/
TIMER
DAILY 1
ON (Time) ON (Time) ON (Time)
ON (Time)
DAILY 2 DAILY 3
REC TMR
Clock setting
(see page 19)
Canceled
Daily 1 Timer Daily 2 Timer Daily 3 Timer
Recording Timer
1
123
4
5
Ex. When Daily Timer 1 setting mode is selected
SET
S77[UJ] Page 35 Monday, April 5, 2004 9:51 AM