JVC UX-A52R Stereo System User Manual


 
– 36 –
2) Press ¢ or 4 repeatedly to select the minute
of the timer-on time, then press SET.
The hour digit of timer-off time starts flashing on
the display.
3) Press ¢ or 4 repeatedly to select the hour of
the timer-off time, then press SET.
The minute digit of timer-off time starts flashing on
the display.
4) Press ¢ or 4 repeatedly to select the minute
of the timer-off time, then press SET.
5
Adjust the volume level.
1) Press ¢ or 4 repeatedly to adjust the volume
level.
You can adjust the volume level within the range
of 0 (silent) to 40 (maximum.)
When you select “VOLUME – –,” the volume is
set to the current volume level.
2) Press SET.
The settings you have done are shown on the
display in sequence.
The DAILY indicator stop flashing and remains lit
on the display.
6
Press STANDBY/ON to turn off the unit (on
standby.)
To turn off the Daily Timer after its setting is done,
1 Press CLOCK/TIMER repeatedly until “DAILY
TIMER” appears on the display.
2 Press ¢ to select “OFF,” then press SET.
The timer (
) and DAILY indicators go off from the
display.
To turn on the Daily Timer again, press 4 to select
“ON,” then press SET.
The timer (
) and DAILY indicators light on the
display.
The settings you have done are shown on the display for
your confirmation.
If the unit is kept turned on until the timer-on time
comes
Daily Timer does not work at all.
Daily Timer will be canceled and the unit will not
turn off automatically in the following:
When you change the source.
When you unplug the AC power cord or if a power
failure occurs
The timer setting, the tuner preset stations and other settings will
be erased.
On the remote control ONLY:
1
Press CLOCK/TIMER repeatedly until DAILY
TIMER appears on the display.
The timer (
) indicator lights, and the DAILY
indicator starts flashing on the display.
Each time you press the button, the timer mode
changes as follows:
2
Press 4 to select ON, then press SET.
3
Select the source to play.
1) Press ¢ or 4 repeatedly to select the source.
Each time you press the buttons, the source
changes as follows:
2) Press SET.
When you have selected FROM FM or
FROM AM, select a preset number by pressing
¢ or 4 (for how to preset stations, see
page 15.)
When you have selected FROM AUX, the
external equipment also needs to have the timer
function.
3) Press SET again.
4
Set the timer-on and timer-off time.
1) Press ¢ or 4 repeatedly to select the hour of
the timer-on time, then press SET.
The minute digit of timer-on time starts flashing on
the display.
Continued
FROM CD
FROM AUX
FROM TAPE
FROM FM
FROM AM
»»
Timer-on time
Timer-off time
DAILY
REC TIMER DAILY TIMER
TIME ADJUST
Canceled
Timer mode
DAILY indicator
Timer indicator
EN33-37UX-A52R[B]_f 01.12.4, 7:52 PM36