Filter
Top Products
9
Putting the Batteries into the Remote
Control
Insert the batteries—R6(SUM-3)/AA(15F)—into the
remote control, by matching the polarity (+ and –) on
the batteries with the + and – markings on the battery
compartment.
When the remote control can no longer operate the
unit, replace both batteries at the same time.
• DO NOT use an old battery together with
a new one.
• DO NOT use different types of batteries
together.
• DO NOT expose batteries to heat or
flame.
• DO NOT leave the batteries in the battery
compartment when you are not going to
use the remote control for an extended
period of time. Otherwise, the remote
control will be damaged from battery
leakage.
R6(SUM-3)/AA(15F)
1
3
2
12V 4A
DC IN
To car’s cigarette
lighter socket (12 V)
Car adapter
(JVC model: CA-R120E)
Connect a car adapter to the DC IN (12 V, 4 A)
connector and the cigarette lighter socket.
• DO NOT connect the car adapter to the
cigarette lighter socket before connecting
it to the DC IN connector. Otherwise, a
short-circuit may occur if the adapter plug
makes contact with any metal part inside
the car.
• DO NOT use this unit for a long time in a
car while the car ignition switch is turned
“OFF” (or set to “ACC”). Otherwise, the
car battery will be exhausted.
When using the unit in your car
EN01-15_UX-H30[B]f.pm6 02.12.26, 1:35 PM9