JVC TH-S33 Home Theater System User Manual


 
Playback
18
7 Screen saver
A TV screen may burn out if a static picture is displayed for a long
time. To prevent this, the system automatically dims the screen if a
static picture is displayed for over 5 minutes (the screen saver
function).
Pressing any button will cancel the screen saver function.
If you do not want to use the screen saver function, see page 32.
You can move back the playback position by
10 seconds from the current position.
7 During playback
On the remote control:
Press .
NOTE
This function works in the same title.
This feature may not work for some discs.
7 During playback
On the remote control:
Press y or 1.
Each time you press the button, the
search speed changes (x2, x5, x10,
x20, x60).
To return to normal speed playback
Press DVD/CD
3 (play button).
On the center unit:
Press and hold x or 4.
Continuously pressing x or 4 increases the fast-forward/
reverse search speed (x5=x20).
NOTE
When a DVD VIDEO, DVD VR, VCD or SVCD is played back, no
sound comes out during fast-forward/reverse search.
When a CD is played back, sound is intermittent and low during fast-
forward/reverse search.
This feature may not work for some discs.
For MP3,
the search speed is not shown.
7 Using x / 4 buttons
7 For DVD VIDEO/DVD VR
(chapter): During playback
For VCD/SVCD (track):
During playback without PBC function
For CD/MP3/JPEG (track/file): During playback or while
stopped
Press x or 4 repeatedly.
NOTE
When playing back an MP3/JPEG, you can make operations using the
file control display. (See page 24.)
This feature may not work for some discs.
7 Using number buttons on the remote control
7 For DVD VIDEO/DVD VR (title, chapter):
While stopped, the title number is selected.
During playback, the chapter number is selected.
For VCD/SVCD (track):
During playback without PBC function
For CD/MP3/JPEG (track/file):
During playback or while stopped
Press number buttons (0-10, +10) to select
the desired number.
For details on using the number buttons, see “How to use the
number buttons” below.
One touch replay
Fast-forward/fast-reverse
search
Skip to the beginning of a
desired selection
How to use the number buttons
To select 3: Press 3.
To select 14: Press +10, then 4.
To select 24: Press +10 twice, then 4.
To select 40: Press +10 three times, then 10.
Or press +10 four times, then 0.
See page 16 for button locations.
TH-S33-11[AU].book Page 18 Monday, April 4, 2005 2:54 PM