Filter
Top Products
25
Basic operations of disc/file playback
■When a disc/file is played back
Press 7.
When playback is stopped in the middle, playback
can be started from the stopped position.
■When a disc/file is played back
Follow any of the operations below.
*1 “RESUME” is displayed in the display window.
If 7 is pressed twice, the position where
playback has been stopped is cleared.
*2 After this operation, the position where playback
has been stopped is stored even when the main
unit is turned off by pressing [AUDIO F].
*3 When you press [AUDIO F] to turn on the
main unit again, the position where playback
has been stopped is cleared.
■When a disc/file is stopped in the middle
Press [DVD 3] or [USB 3].
NOTE
• This function does not work in program playback
or random playback.
• The stored position is cleared if the disc tray is
opened or the USB device is disconnected.
• You can deactivate the resume playback func-
tion. (Refer to “RESUME” on page 40.)
• When a file on the USB device is selected as the
source, this function may not work as explained
above.
■When a disc/file is played back
Press 8.
• To return to normal playback, press [DVD 3],
[USB 3] or 3(playback).
■When a disc/file is paused
Press 8 repeatedly.
• To return to normal playback, press [DVD 3],
[USB 3] or 3(playback).
Stopping playback
Resuming playback
Press 7 once to stop playback.
*1 *2
Select a source other than “DVD” or “USB” in the
display window.
*2
Press [AUDIOF] to turn off the main unit.
*3
Temporarily stopping playback
Starting playback from the stored
position
Pausing playback
Advancing the picture frame
by frame
(only for moving images)
Basic operations of disc/file playback (continued)
TH-F3[J_C]-06.fm Page 25 Tuesday, March 18, 2008 1:33 PM