Filter
Top Products
Introduction
45
(Continued)
Recording Sound to Cassette Tapes
3
Select a sound source for recording.
4 Press on the main unit.
Example: Display while CD sound is recorded
• When you record from a disc, all tracks are
recorded to the cassette tape.
• When you want to record sound from other
equipment, start playback on the connected
equipment.
• When recording finishes, the color pattern of
the display window and disc tray switches to
the color pattern set in "MANUAL" to inform
you that recording has finished (
page
18).
Press .
(Excluding DVD VIDEOs)
Before proceeding to step 4, play back
the track you want to record.
• Pressing in step 4 returns playback to
the beginning of the track and only that track
is recorded.
(For a DVD VIDEO: while the disc is paused)
■For a CD/VCD/SVCD/DVD VIDEO
Before proceeding to step 4, select the
starting track/chapter number by
pressing or .
■For a DVD AUDIO/MP3/WMA
Before proceeding to step 4, select the
group number by pressing or
, and then select the track num-
ber by pressing or .
Before proceeding to step 4, program
the tracks you want to record
( page 31).
Before proceeding to step 4, play back
a disc, pause the playback, and then
press to return to the beginning
of the first track.
Select the sound from other equip-
ment (AUX) in step 3, and then press
.
• Do not play back any tracks on the
connected equipment.
NOTE
• If the cassette tape reverses direction while a track
is being recorded from a disc, this product starts
recording that track again from the beginning onto
the reverse side of the cassette tape. However, if
12 or less seconds of that track were recorded onto
the first side of the cassette tape, recording to the
reverse side of the cassette tape starts from the
beginning of the previous track.
For the locations of remote control
buttons, refer to page 44.
Sound source Operation
Disc
Press , and then press .
(The disc is stopped.)
Radio
broadcast
Select the radio station whose broad-
cast you want to record ( page 19).
Sound from
other
equipment
(AUX)
Press and prepare playback on
the other equipment ( page 43).
Quitting Recording
Recording Only One Track
from a Disc
Recording the Second or
Subsequent Track to the Last
Track from a Disc
Program Recording from a
Disc
Recording with No Blank Time
between Tracks
Erasing Recorded Sound
from a Cassette Tape
UX-QD9[UN].book 45 ページ ２００４年９月２８日 火曜日 午前１０時５４分