Filter
Top Products
8
Connection using the component
video jacks
If your TV does not support progressive video input,
connect a TV via the AV (scart) connector (see
below).
For the BNC connection, use a plug adapter (not
supplied).
Connection using the scart connector
* Some TVs’ scart connectors emit audio signals. In such a
case, you can enjoy the TV sound through this System by
selecting TV SOUND as the source to play. ( 10)
No sound signal comes out from the AV (scart)
connector.
,
Select “VIDEO” as the source ( 10) for playing
a component connected as follows.
Video connection
To view a video from the external component
connected as above:
– Connect a TV via the AV (scart) connector (see
the left column).
– Select an appropriate video input setting
according to the video connection. ( 13)
Audio connection
Connecting a digital component
Select “OPT” as the audio input setting before
playing back. ( 13)
Connecting an analog component
Select “2CH” as the audio input setting before
playing back. ( 13)
Plug in the System only after all other connections have
been completed.
Connecting external components
From component
video input
TV
Component video
cord (not supplied)
Green
Blue
Red
TV
Scart cable
(not supplied)
To scart connector
*
Connecting the AC power cord
Composite video cord
(not supplied)
or
S-video cord
(not supplied)
A From composite video output
B From S-video output
Align the
5 marks.
VCR, etc.
STB (Set Top
Box), etc.
From digital optical output
Digital optical cable
(not supplied)
From audio output
RCA pin plug cord
(not supplied)
VCR, etc.
Available video output terminals for each source
Source
Terminal
DVD
USB
IPod VIDEO
HDMI √ ——
COMPONENT √ ——
AV (scart) √
√
(Composite signal only)
√
(Composite signal only)
√: Available —: Not available
Do not connect the power cord
until all other connections have
been made.
TH-D51[B]EN.book Page 8 Friday, August 3, 2007 10:26 AM