JVC SP-PWM303 Home Theater System User Manual


 
Playback
20
7 Disc information on the display window
The disc indicators on the display window show the current status
of the corresponding disc tray.
Example:
When the discs are loaded to disc trays 1, 2 and 5, and the disc in the
disc tray 5 is selected.
7 Screen saver
A TV screen may burn out if a static picture is displayed for a long
time. To prevent this, the system automatically dims the screen if a
static picture is displayed for over 5 minutes (the screen saver
function).
Pressing any button will cancel the screen saver function.
If you do not want to use the screen saver function, see page 35.
You can move back the playback position by 10 seconds
from the current position.
7 During playback
On the remote control:
Press .
NOTE
This function works in the same title.
This feature may not work for some discs.
7 During playback
On the remote
control:
Press y or 1.
Each time you press the button, the search speed changes (M2,
M5, M10, M20, M60).
To return to normal speed playback
Press 3 (play button).
On the remote control and the center unit:
Press and hold x or 4.
Continuously pressing x or 4 increases the fast-forward/
reverse search speed (M5 M20).
NOTE
The operation with x or 4 above is available for a disc other
than MPEG4 disc.
When a DVD VIDEO, VCD, SVCD, or MPEG4 disc is played back,
no sound comes out during fast-forward/reverse search.
When a DVD AUDIO or CD is played back, sound is intermittent and
low during fast-forward/reverse search.
This feature may not work for some discs.
7 Using x/4 buttons
7 For DVD VIDEO (chapter):
During playback
For VCD/SVCD (track):
During playback without PBC function
For DVD AUDIO/CD/MP3/WMA/JPEG/MPEG4 (track/file):
During playback or while stopped
Press x or 4 repeatedly.
NOTE
When playing back an MP3/JPEG disc, you can make operations
using the file control display. (A pg. 26)
This feature may not work for some discs.
7 Using number buttons on the remote control
7 For DVD VIDEO (title, chapter):
While stopped, the title number is selected.
During playback, the chapter number is selected.
For DVD AUDIO (track):
During playback or while stopped
For VCD/SVCD (track):
During playback without PBC function
For CD/MP3/WMA/JPEG/MPEG4 (track/file):
During playback or while stopped
Press number buttons (0-10, +10) to select
the desired number.
For details on using the number buttons, see How to use the
number buttons below.
One Touch Replay
Fast-forward/fast-reverse
search
Currently loaded disc number
Currently selected
disc number
Skip to the beginning of a
desired selection
How to use the number buttons
To select 3: Press 3.
To select 14: Press +10, then 4.
To select 24: Press +10 twice, then 4.
To select 40: Press +10 three times, then 10.
Or press +10 four times, then 0.
See page 18 for button locations.
TH-M303[B].book Page 20 Monday, February 9, 2004 4:53 PM