JVC SP-MXKC15 CD Player User Manual


 
23
Using the Timers
English
Using the Unit
You can set the time in the same way as for setting the Daily Timer.
1
Insert a blank or erasable tape into the Deck
B and wind past the tape leader.
2
Press the CLOCK TIMER button until “ON TIME”
immediately after “REC” appears on the display.
Each time you press the button, the display changes as follows:
DAILY = ON TIME = REC = ON TIME* = Clock setting
display = Canceled = (back to the beginning)
*: This item should be selected for the REC Timer setting.
Then, the System enters ON-time setting mode. The current
ON time appears on the display and the hour digits, “REC” in-
dicator blinks and the Timer indicator ( ) lights up.
3
Setting the ON time you want the System to
turn on.
1. Press the 4 or ¢ button to set the hour, then press the
SET/DISPLAY button.
2. Press the 4 or ¢ button to set the minute, then press the
SET/DISPLAY button.
“OFF TIME” appears and then the System enters OFF-time
setting mode. The current OFF time appears on the display,
and the hour digits blink.
4
Setting the OFF time you want the System to
turn off.
1. Press the 4 or ¢ button to set the hour, then press the
SET/DISPLAY button.
2. Press the 4 or ¢ button to set the minute, then press the
SET/DISPLAY button.
The System enters Preset Station Entering mode.
5
Select the preset station for recording.
1. Press the 4 or ¢ button to set the band (TUNER FM or
TUNER AM), then press the SET/DISPLAY button.
2. Press the 4 or ¢ button to set the preset number, then
press the SET/DISPLAY button.
6
Setting the volume level.
Press the ¢ or 4 button to select the volume level.
MIN, 1-26, or MAX: When the timer is turned on, the Volume
will be automatically faded into the selected volume level.
When the volume level is set to MIN, no sound comes out of the
speakers.
7
Press the SET/DISPLAY button.
The timer setting is completed, the display returns to the dis-
play before you set the Timer.
8
Press the STANDBY/ON button to turn
off the System, if necessary.
The Timer indicator ( ) and “REC” indicator are lit on the
display, showing that the REC Timer is set to on.
To confirm / change the timer setting, repeat the setting pro-
cedure from the beginning.
When the timer ON-time comes:
When the timer ON-time comes, the System automatically
turns on. The station you have set is played. The “REC” indica-
tor lights up and the Timer indicator ( ) and the Tape Indica-
tor (3) blinks during timer operation.
To stop timer recording, press the 7 button.
When the timer OFF-time comes, the System automatically
turns off.
If the System is already on when the timer ON-time
comes, the REC Timer does not work.
Turning the REC (Recording) Timer On and Off
Once you have set the REC Timer to record a source, the timer set-
ting is stored in memory. So, though the REC Timer turns off once
it is used, you can recall it at any time.
To cancel the REC Timer temporarily:
1
Press the CLOCK TIMER button on the Unit
repeatedly until “REC” appears on the dis-
play.
The Timer indicator ( ) lights up and the “REC” indicator
blinks on the display.
2
Press the CANCEL/DEMO button on the Unit.
“OFF” appears and both the Timer indicator ( ) and the
“REC” indicator go out.
To activate the cancelled REC Timer:
1
Press the CLOCK TIMER button on the Unit
repeatedly until “REC” appears on the dis-
play.
The Timer indicator ( ) lights up and the “REC” indicator
blinks on the display.
2
Press the SET/DISPLAY button on the Unit.
“ON” appears on the display. The Timer indicator ( ) and
the “REC” indicator remain lit, and the display returns to the
original display.
If the System is unplugged, or a power failure occurs,
the timer setting will be lost in a few days. You will
need to reset the clock first, then the timer.
Body.fm Page 23 Thursday, April 7, 2005 8:46 AM