Filter
Top Products
Preparation
7 Attaching the base plate
To prevent the speaker from falling over, be sure to attach the
supplied base plate to each speaker.
• Take care not to drop the base plate or speaker while
assembling; otherwise, it may cause damage to the floor or
injury.
• Ensure enough space for assembly and installation.
• Place a large, thick cloth on the floor where you assemble the
speaker, so you can protect the floor and the speaker itself.
• Do not touch the speaker units.
Turn the speaker upside down and attach the base plate
securely on the bottom of the speaker with the supplied
screws as illustrated.
• Prepare a Phillips screw driver.
• Make sure that the FRONT arrow on the top of the base plate
points the front side of the speaker.
7 To remove the speaker grille
To remove the speaker grille, insert your fingers at the bottom
of the speaker grille, then pull upward.
To attach the speaker grille, put the projections of the speaker
into the holes of the speaker grille.
• Do not press the speaker grille strongly.
Base plate
Screw M4 x 20 mm
(supplied)
Speaker
(Front side)
Speaker units
SP-F508[UJ]f.p65 04.7.26, 4:10 PM4