Filter
Top Products
10
Audio connection
Connecting a digital component
The initial setting for the audio input setting is “OPT.”
When using COAXIAL jack, change the setting to
“COAX” before playing back. ( 14)
Connecting an analog component
Select “2CH” as the audio input setting before
playing back. ( 14)
Connecting a cassette recorder
The surround mode affects the signals emitted from
the AUDIO OUT jacks. When recording on to a tape,
set the surround mode to “OFF.” ( 14)
When “5.1CH” is selected as the audio input setting
for “VIDEO1,” only the left and right audio signals are
emitted.
Connection for “VIDEO”—TH-D50
Select “VIDEO” as the source ( 12) for playing
a component connected as follows.
Video connection
*
Connect an external component with the same kind of cable
as the one used to connect the TV. ( 9)
Audio connection
Connecting a digital component
Select “OPT” as the audio input setting before
playing back. ( 14)
Connecting an analog component
Select “2CH” as the audio input setting before
playing back. ( 14)
Plug in the System only after all the connections have
been completed.
If the AC outlets do not match the AC plugs, use the
supplied AC plug adapter.
DBS (Direct
Broadcast
Satellite)
tuner, etc.
Digital coaxial cable
(not supplied)
A From digital coaxial output
B From digital optical output
Digital optical cable
(not supplied)
From audio output
RCA pin plug cord
(not supplied)
VCR, etc.
RCA pin plug cord
(not supplied)
Cassette
recorder
From audio input
From audio output
Connecting the AC power cord
Composite video cord*
(supplied)
or
S-video cord
*
(not supplied)
A From composite video output
B From S-video output
Align the
5 marks.
VCR, etc.
DBS (Direct
Broadcast
Satellite)
tuner, etc.
From digital optical output
Digital optical cable
(not supplied)
From audio output
RCA pin plug cord
(not supplied)
VCR, etc.
Available video output terminals for each source
Source
Terminal
DVD
USB
IPod
VIDEO2 (TH-D70)
VIDEO (TH-D50)
VIDEO1
(TH-D70 only)
HDMI √√
COMPONENT √
S-VIDEO √√√
VIDEO (Composite video) √√√
Do not connect the power cord
until all other connections have
been made.
TH-D70D50[UJ].book Page 10 Friday, June 1, 2007 1:42 PM