Filter
Top Products
ENGLISH
7OPERATIONS
Preparation
Canceling the display demonstration and setting the clock
• See also page 14.
1
Turn on the power.
2
[Turn] = [Press]
Cancel the display demonstrations
Select “DEMO,” then “DEMO OFF.”
Set the clock
Select “CLOCK” = “CLOCK SET.”
Adjust the hour, then press control dial once to proceed to adjust
the minute.
• To return to the previous menu, press BACK.
Changing the display information
When the power is turned off: The current clock time is displayed if “CLOCK DISP” is set to “CLOCK OFF,”
(see page 14).
When the power is turned on: The display information of the current source changes as follows:
FM/AM Frequency = Clock = Station name *
1
= (back to the beginning)
CD
CD/USB
Audio CD/CD Text: Disc title/performer *
2
= Track title *
2
= Current track number with the
elapsed playing time = Current track number with the clock time =
(back to the beginning)
MP3/WMA: Album name/performer (folder name) *
3
= Track title (file name) *
3
=
Current track number with the elapsed playing time = Current track
number with the clock time = (back to the beginning)
*
1
If no title is assigned to a station, “NO NAME” appears. To assign a title to a station, see page 13.
*
2
If the current disc is an audio CD, “NO NAME” appears.
*
3
If an MP3/WMA file does not have Tag information or “TAG DISPLAY” is set to “TAG OFF” (see page 14),
folder name and file name appear.
Press and hold until
the main menu is
called up.
• Repeat this
procedure.
EN02-09_KD-R400[J]_f.indd 7EN02-09_KD-R400[J]_f.indd 7 9/10/08 3:33:29 PM9/10/08 3:33:29 PM