Filter
Top Products
52
Reference
Receiver (RX-EXA10)
Tuner
FM frequency: 87.50 MHz - 108.00 MHz
AM frequency:
531 kHz – 1 710 kHz (9 kHz spacing)
530 kHz – 1 710 kHz (10 kHz spacing)
Amplifier
Output power (Tweeter): 20 W + 20 W
at 6 C (10 kHz, THD 10 %)
Output power (Woofer): 30 W + 30 W
at 6 C (1 kHz, THD 10 %)
Ter mi nal
• Synchronization terminal x 1 (for connecting XV-EXA10)
• Optical digital input terminal x 1 (for connecting XV-EXA10)
-21 dBm to -15 dBm
• Audio input terminals (2) x 1 (for connecting XV-EXA10)
500 mV/50 k C
• Audio output speaker terminals (2) x 4
Impedance: 6
C
• FM antenna terminal x 1
• AM antenna terminal x 1
• Audio output subwoofer terminal x 1
500 mVrms/10 k
C
• Optical digital input terminal x 1 (for connecting other
equipment)
-21 dBm to -15 dBm
• Audio input terminals (2) x 1 (for connecting other
equipment)
Level 1: 500 mV/50 k
C
Level 2: 250 mV/50 k C
• Audio output headphone terminal x 1
11 mW/32
C (Impedance :16 C to 1 k C)
General
Power source (Hong Kong):
AC 220 V , 50 Hz
Power source (Australia)
: AC 240 V , 50 Hz
Power source (other countries/areas):
AC 110 - 240 V , 50 Hz/60Hz
Power consumption: 30 W (in operation)
0.9 W (on standby)
Dimensions (W x H x D):
245 mm x 80 mm x 297 mm
Weight (1 unit): 2.7 kg
Speakers (SP-EXA10)
Type: 2-way bass-reflex type
Magnetically shielded type
Tweeter: 2 cm wood dome
Woofer: 10.5 cm wood cone
Power handling capacity: 20 W
(Tweeter)
Power handling capacity: 30 W
(Woofer)
Impedance: 6 C
Sound pressure level: 82 dB/W m
Dimensions (W x H x D): 143 mm x 257 mm x 243 mm
Weight (1 unit): 3.5 kg
DVD player (XV-EXA10)
Playable DVDs/CDs
DVD VIDEO/DVD AUDIO
VCD/SVCD/CD
CD-R/RW (VCD/SVCD/CD/MP3/WMA/JPEG/DivX/
ASF/MPEG1/MPEG2 format)
DVD-R (MP3/WMA/JPEG/DVD VIDEO/DVD VR
[CPRM]/DivX/ASF/MPEG1/MPEG2 format)
DVD-RW (MP3/WMA/JPEG/DVD VIDEO/DVD VR
[CPRM]/DivX/ASF/MPEG1/MPEG2 format)
Ter mi nal
• Synchronization terminal x 1 (for connecting RX-
EXA10)
• Optical digital output terminal x 1 (for connecting RX-
EXA10)
-21 dBm to -15 dBm
• Audio output terminals (2) x 1 (for connecting RX-
EXA10)
• Composite video output terminal x 1
1.0 Vp-p, sync negative, 75
C terminated
• S-video output terminal x 1
Y: 1.0 Vp-p, sync negative, 75
C terminated
C: 0.286 Vp-p, sync negative, 75
C terminated
• Component video output terminals (3)
Y: 1.0 Vp-p, sync negative, 75
C terminated
P
B: 0.7 Vp-p, 75 C terminated
P
R: 0.7 Vp-p, 75 C terminated
• AV COMPU LINK terminal x 1
General
Power source (Hong Kong):
AC 220 V , 50 Hz
Power source (Australia)
: AC 240 V , 50 Hz
Power source (other countries/areas):
AC 110 - 240 V , 50 Hz/60Hz
Power consumption: 9 W (in operation)
0.9 W (on standby)
Dimensions (W x H x D):
245 mm x 80 mm x 270 mm
Weight (1 unit): 2.2 kg
Designs and specifications are subject to change
without notice.
•
Specifications
EXA10[A_Ux]-specification.fm Page 52 Tuesday, October 4, 2005 10:13 AM