Filter
Top Products
< 20 >
When its level is high, a 1kHz signal can produce a smooth waveform after the A/D and D/A
conversion. When the level is low, however, a stepped waveform results due to the limitation
in the resolution of a digital signal. This phenomenon occurs because digital quantization
distortion increases as the levels are reduced.
A/D and D/A Conversion in Amplitude Domain
CC Converter
CC Converter
Problem: An analog signal of a very faint strength cannot be
accurately recreated by A/D and D/A conversion. (1)
Problem: An analog signal of a very faint strength cannot be
accurately recreated by A/D and D/A conversion. (1)
RX-D702