Filter
Top Products
Page 36
English
Using Dolby Surround
Once you have set the Dolby Surround adjustments, you can use the same adjustment every time you want
to enjoy Dolby Surround.
The receiver memorizes two sets of Dolby Surround adjustment; one for Pro Logic and the other for 3ch Logic.
On the front panel:
1. Press SURROUND MODE so that the Control
%%
%%
% /
fifi
fifi
fi buttons work for selecting the surround
modes.
The lamp next to the button lights up.
2. Press Control
%%
%%
% /
fifi
fifi
fi until “PROLOGIC” or “3CHLOGIC” whichever you want appears on the
display.
The PRO LOGIC or 3CH LOGIC indicator (as well as the SURROUND indicator) also lights up.
Each time you press the button, the surround modes change as follows (the indicator of the selected
surround mode also lights up on the display):
3. Select and play a sound source which was processed with Dolby Surround and is labeled with
DOLBY SURROUND
mark.
To cancel the surround mode, press Control % / fi until “SURR OFF” appears in step 2 above.
The indicator of the selected mode goes off.
From the remote control:
1. Press SURROUND MODE until the surround mode you want appears on the display.
The PRO LOGIC or 3CH LOGIC indicator (as well as the SURROUND indicator) also lights up.
Each time you press the button, the surround modes change as follows (the indicator of the selected
surround mode also lights up on the display):
2. Select and play a sound source which was processed with Dolby Surround and is labeled with
DOLBY SURROUND
mark.
To cancel the surround mode, press SURROUND MODE until “SURR OFF” appears on the display.
The indicator of the selected mode and the SURROUND indicator go off.
MENU
See also
page 40.
SURROUND MODE
Front panel
PROLOGIC 3CHLOGIC
SURR OFF
HALL
(Surround Off)
PROLOGIC 3CHLOGIC
SURR OFF
HALL
(Surround Off)
Remote: Outside
SURROUND
MODE
RX-730RBK(EF)0054-001A.En.29-36 97.7.25, 6:37 PM36