Filter
Top Products
46
English
Cassette deck
After pressing TAPE/MD or TAPE/MD CONTROL (with the
remote control mode selector set to “AUDIO/TV/VCR”), you can
perform the following operations on a cassette deck:
PLAY: Starts playing.
11
11
1: Fast winds the tape from right to left.
¡¡
¡¡
¡: Fast winds the tape from left to right.
STOP: Stops operations.
PAUSE: Pauses playing. To release it, press PLAY.
¶ REC: Press this button with the PLAY button to start
recording.
Press this button with the PAUSE button to enter
recording pause.
MD recorder
After pressing TAPE/MD or TAPE/MD CONTROL (with the
remote control mode selector set to “AUDIO/TV/VCR”), you can
perform the following operations on the MD recorder:
PLAY: Starts playing.
4: Returns to the beginning of the current (or previous)
track.
¢: Skips to the beginning of the next track.
STOP: Stops playing.
PAUSE: Pauses playing. To release it, press PLAY.
¶ REC: Press this button with the PLAY button to start
recording.
Press this button with the PAUSE button to enter
recording pause.
Note:
You can use either TAPE/MD button or the TAPE/MD CONTROL
button to activate the buttons listed above. If you press TAPE/MD, the
playing source also changes. On the other hand, if you press TAPE/
MD CONTROL, the playing source does not change.
CD player-changer
After pressing CD-DISC (with the remote control mode selector set
to “AUDIO/TV/VCR”), you can perform the following operations
on a CD player-changer:
PLAY: Starts playing.
44
44
4: Returns to the beginning of the current (or previous)
track.
¢¢
¢¢
¢: Skips to the beginning of the next track.
STOP: Stops playing.
PAUSE: Pauses playing. To release it, press PLAY.
1 – 6, 7/P: Selects the number of a disc installed in a CD
player-changer.
After pressing CD (with the remote control mode selector set to
“AUDIO/TV/VCR”), you can perform the following operations on
the CD player-changer:
1 – 10, +10: Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
Turntable
After pressing PHONO (with the remote control mode selector set to
“AUDIO/TV/VCR”), you can perform the following operations on a
turntable:
PLAY: Starts playing.
STOP: Stops operations.
EN45_56.RX-7000R[E]/f 00.4.24, 3:09 PM46