Filter
Top Products
5
English
Connecting the subwoofer speaker
You can enhance the bass by connecting a subwoofer.
Connect the input jack of a powered subwoofer to the
SUBWOOFER OUT jack on the rear panel, using a cable with RCA
pin plugs (not supplied).
SUBWOOFER
OUT
CD
PHONO
AUDIO
TV SOUND
VCR
OUT
(REC)
IN
(PLAY)
CD
IN
(PLAY)
RIGHT LEFT
TAPE
CDR
OUT
(REC)
Cassette deck or CD recorder
Cassette deck
To audio output
To audio input
Powered subwoofer
To audio outputTo audio input
CD recorder
Connecting Audio/Video Components
You can connect the following audio/video components to this
receiver. Refer also to the manuals supplied with your components.
*
You can connect these components using the methods described in
“Analog connections” (below) or in “Digital connections” (see page
7).
Analog connections
Audio component connections
Use the cables with RCA pin plugs (not supplied).
Connect the white plug to the audio left jack, and the red plug to the
audio right jack.
CAUTION:
If you connect a sound-enhancing device such as a graphic equalizer
between the source components and this receiver, the sound output
through this receiver may be distorted.
Audio Components Video Components
• CD player* • DVD player*
• Cassette deck • TV*
or CD recorder* • VCR
CD player
CD player
AUDIO
TV SOUND
VCR
OUT
(REC)
IN
(PLAY)
TAPE
CDR
CD
OUT
(REC)
IN
(PLAY)
RIGHT LEFT
To audio output
Note:
You can connect either a cassette deck or a CD recorder to the TAPE/
CDR jacks. When connecting a CD recorder to the TAPE/CDR jacks,
change the source name, which will be shown on the display when
selected as the source, to “CDR.” See page 11 for details.
If your audio components have a COMPU LINK jack
See also page 25 for detailed information about the connection and
the COMPU LINK remote control system.
EN01-07.RX-6010&6012[US]_f 00.12.20, 2:21 PM5