Filter
Top Products
8
English
Turning the Power On and Off (Standby)
On the front panel:
To turn on the power, press STANDBY/ON .
The STANDBY lamp goes off. The name of the
current source (or station frequency) appears on
the display.
To turn off the power (into standby mode),
press STANDBY/ON
again.
The STANDBY lamp lights up. A small amount
of power is consumed in standby mode.
To turn the power off completely, unplug the AC
power cord.
From the remote control:
To turn on the power, press AUDIO .
The STANDBY lamp goes off. The name of the
current source (or station frequency) appears on
the display.
To turn off the power (into standby mode),
press AUDIO
again.
The STANDBY lamp lights up.
Selecting the Source to Play
Press one of the source selecting buttons.
On the front panel:
From the remote control:
Basic Operations
The following operations are commonly used when you play any sound source.
DVD MULTI
CD
DVD
PHONO
VCR
TAPE/MD
SOURCE NAME
FM
AM
Selected source name appears
Current volume level
is shown here
Current source
name appears
VOLUME
AUDIO
MUTE TUNED SLEEP 3D-PHONIC
AUTO STEREO PRO LOGIC HALL
DAP
L
VOLUME
R
CH-
MHz
kHz
TAPE/MD
FM/AM
VCR
DVD
DVD MULTI
PHONO
CD
*
*
*
*
Note:
When you press one of the source
selecting buttons, marked above with
an asterisk (
*
), on the remote control,
the receiver automatically turns on.
On the front panel:
DVD MULTI Select the DVD player for viewing the digital video
disc using the analog discrete output mode (5.1CH
reproduction) on the DVD player.
To enjoy the DVD MULTI playback, see page 22.
DVD Select the DVD player for viewing the stereo digital
video disc.
VCR Select the video component connected to the VCR
jacks.
FM Select an FM broadcast.
AM Select an AM (MW/LW) broadcast.
TAPE/MD Select the cassette deck (or the MD recorder).
PHONO Select the turntable.
CD Select the CD player.
From the remote control:
FM/AM Select an FM or AM (MW/LW) broadcast.
Each time you press the button, the band alternates
between FM and AM (MW/LW).
• Other buttons function in the same way as the buttons on the front
panel.
Note:
When connecting an MD recorder (to the TAPE/MD jacks), change the
source name that appears on the display. See page 11 for details.
STANDBY
STANDBY/ON
/I
STANDBY
STANDBY/ON
/I
EN08_22.RX-558R[E]/1 99.1.28, 8:38 PM8