Filter
Top Products
31
AV COMPU LINK Remote Control System
The AV COMPU LINK remote control system allows you to operate JVC’s video components (TV, VCR, and DVD player)
through the receiver.
RX-5040B/RX-5042S/RX-5045B are equipped with conventional AV COMPU LINK, while
RX-6040B/RX-6042S are equipped with the AV COMPU LINK-III, which adds a function to
operate JVC’s video components through the component video jacks.
To use this remote control system, connect the video components you want to operate,
following the diagrams below and the procedure on the next page.
CONNECTIONS 1: AV COMPU LINK Connection
CAUTION:
You can only connect to the TV with the AV COMPU LINK EX or AV COMPU LINK-III jack.
DO NOT connect to the TV with AV COMPU LINK RECEIVER/AMP jack.
Notes:
• For RX-6040B/RX-6042S: When connecting the receiver and a TV with the AV COMPU LINK EX jack by using a component video cable, you
cannot use automatic selection of TV’s input mode (see page 32).
• Make sure that the remote control code for the connected VCR is set to code “A.”
• When connecting only the VCR or DVD player to the receiver, connect it directly to the receiver using cables with the monaural mini-plugs.
CONNECTIONS 2: Video Cable Connection
Connect the VCR and/or DVD player to the TV using one of the following methods:
• For RX-6040B/RX-6042S: When using the AV COMPU LINK remote control system, set the component video input for the DVD
player and the VCR correctly (see “Setting the Component Video Input” on page 22); otherwise, the correct input for this receiver will
not be selected on the TV.
When connecting the source equipment to the receiver through the S-video jacks, connect the receiver
to the TV’s video input 1 jack (S-video input) using S-video cables.
When connecting the source equipment to the receiver through the composite video jacks, connect
the receiver to the TV’s video input 2 jack (composite video input) using composite video cables.
When connecting the source equipment to the receiver through the component video jacks, connect
the receiver to the TV’s video input 2 jack (component video input) using component video cables.
Source
equipment
This receiver
TV
To video input 1
S-video cable
S-video cable
Source
equipment
TV
To video input 2
Composite
video cable
Composite
video cable
Source
equipment
TV
To video input 2
Component
video cable
Component
video cable
VCR DVD player
TV
This receiver
This receiver
(Only for
RX-6040B/
RX-6042S)
CASE 2
CASE 1
CASE 3
AV
COMPU LINK
AV
COMPU LINK – III
RX-5040B/RX-5042S/RX-5045B
RX-6040B/RX-6042S
AV
COMPU LINK
VHS
AV
COMPU LINK
AV
COMPU LINK EX
DVD
AV
COMPU LINK-
ΙΙΙ
This receiver
(Only for
RX-6040B/
RX-6042S)
31-39_5040&6040[J]f.p65 03.12.19, 2:3831