Filter
Top Products
16
Repeat play (using the remote control unit)
Press the REPEAT button before or during play. A single track or all the
tracks can be repeated.
Whether a single track or all tracks are to be repeated can be specified.
Each time the REPEAT button is pressed, the mode will change from a
single track ( ), to all the tracks ( ALL), to the clear mode, in this
order.
ALL
REPEAT
Single track
Goes off.
Repeat playback is released.
All tracks
Random play (using the remote control unit)
Press the RANDOM button.
“RANDOM” appears in the display window. After all tracks are played
back once in random order, playback stops and random play is released.
Note:
Move the unit as far away possible from a TV or other radio set. Otherwise,
the CD playback sound will be degraded or the TV picture may be
distorted.
RANDOM
HANDLING CASSETTE TAPES
÷ Single track repeat ( )
The current or specified track will be played repeatedly.
÷ All tracks repeat ( ALL)
All tracks or the programmed tracks of a CD will be played repeatedly.
Cassette loading
1. Set the LOCK/RELEASE knob to RELEASE to open the cassette holder.
2. Insert a cassette tape as shown.
3. Close the cassette tape holder and set the LOCK/RELEASE knob to
LOCK, listening for the click that indicates the cassette holder is
securely closed.
Adhesive tape
Tab “A”
Side “B”Tab “B”
Side “A”
Turn the pencil to tighten the tape.
Cassette tapes
1. Loose tape may cause trouble. Using a pencil or like object, gently
tighten the tape as shown.
2. To prevent recordings from being erased accidentally, remove the
tab(s) with a screwdriver, etc. Reseal the slots with adhesive tape to
erase and re-record after the tabs have been removed.
3. C-120 cassettes are not recommended because they are prone to
malfunction.
Note:
If the power is switched off while tape is running, it may be impossible to
remove the cassette. If this happens, switch the power on again before
attempting to remove the cassette.
Auto tape select mechanism
This unit has an Auto Tape Select mechanism which distinguishes between
different types of tape using detection holes in the cassette. After the
type of tape has been detected, bias and equalization suitable for the
tape are set.
÷ Cassettes with detection holes:
Metal tape (EQ: 70 µs) .................... Type IV
CrO
2 (chrome) tape (EQ: 70 µs) ..... Type II
÷ Cassettes without detection holes:
Normal tape (EQ: 120 µs) ............... Type I
Metal/CrO2 tape detection holes