Filter
Top Products
14
English
Playing back introductions – Intro playback
Every track of a CD can be played for the beginning 10 seconds.
TAPE
FM MODE
/BEAT CUT
PROGRAM/
CLOCK SET
UP
DOWN
INTRO
HBS/
PRESET EQ
REPEAT
STANDBY/ON
DISPLAY
MUTING
PRESET
VOLUME
RM-SRCEX30J REMOTE CONTROL
123
456
789
0
OVER
CD/
RANDOM
TUNER/
BAND
GROUP
+
–
INTRO
Press INTRO.
The INTRO indicator appears in the display window and
intro playback starts.
You cannot use intro playback during program and
random mode.
To stop during playback
Press STOP 7 (or 7 on the remote control unit).
The INTRO indicator goes off and the unit exits from
the intro playback.
To cancel intro playback without stopping
Press INTRO during playback.
The INTRO indicator goes off and the unit continues
playback.
Programmed playback of an MP3 disc
Up to 40 tracks can be programmed to play in any desired order.
1
Press PROGRAM/CLOCK SET in stop mode.
The PROGRAM indicator appears in the display
window.
2
Press GROUP + or GROUP – to select a desired
group (album).
The first track number in the selected group (album)
is shown.
3
Press 4 or ¢ to select a desired track in the
group (album).
You can use the number buttons on the remote control
unit to select a desired track.
4
Press PROGRAM/CLOCK SET.
5
Repeat steps 2 to 4 to program other tracks.
6
Press PLAY/PAUSE 3/8.
The tracks are played in the order you have
programmed.
You can press 3/8 on the remote control unit to start
programmed playback.
To check the program contents
Press PROGRAM/CLOCK SET repeatedly in stop
mode.
Each time you press the button, the program number and
the corresponding track number are shown in the display
window.
To change the program
You can add tracks in the program or edit the program in
the same manner as for an audio CD. See the previous
page.
To erase the entire program in the memory
Press STOP 7 (or 7 on the remote control unit) in stop
mode.
The program is cleared, and the PROGRAM indicator
goes off.
The program is also cleared when you open the disc door
or turn off the unit.
Note:
You cannot program more than 40 tracks.
“– – FULL – –” is displayed when you try to program
the 41st track.
02_01-23_RC-EX30B_J_En.p65 04.8.17, 0:43 PM14