JVC MX-D401T Speaker System User Manual


 
24
English
Setting the Timer
o You can set the Timer whether the Unit is on or off.
Procedure For Setting the Timer
1. Press the SHIFT button.
2. Press the 2 TIMER button.
The Timer indicator on the display lights up and the blinking “TIMER ON” changes to the On Time
setting display.
3. Set the time you want the Unit to
come on.
Press the SELECT 5 + or 4 – button to set
the On Time.
4. Press the 8 SET button.
“TIMER OFF” blinks on the display, and the display changes to the Off Time setting display.
5. Set the time you want the Unit to
be turned off.
Press the SELECT 5 + or 4 – button to set
the Off Time.
6. Press the 8 SET button.
The name of the source blinks in the display.
7. Press the SELECT 5 + or 4 – button
to select the source.
The display changes with each press of the button
as shown.
Ô TUNER Ô TUNER REC Ô CD Ô TAPE Ô
TUNER: Selects the last station you were listening to.
TUNER REC: Records the last station you were listening to.
CD: Plays the last CD you were listening to.
TAPE: Plays the last tape you were listening to.
In the source “TUNER”, “CD”, or “TAPE”, the timer acts as a Daily timer. Once the Daily timer
has been set, it will be activated at the same time every day until the setting is turned off.
In the source “TUNER REC”, the timer acts as a Once timer. After the Once timer has been
performed, the details of the setting remain stored but the Timer status is set to off.
\
\
SHIFT
2
TIMER
8
SET
45
– SELECT +
45
– SELECT +
8
SET
45
– SELECT +
CA-D301/401/501T[U]/EN 97.7.15, 6:08 PM24