Filter
Top Products
15
English
For Tape operations, use buttons inside the front cover on the
unit.
Playing Back a Tape
You can play back type I tapes only.
On the unit ONLY:
1
Open the front cover.
2
Press &/) (stop/cassette holder open).
The cassette holder opens.
3
Put a cassette in with the exposed part of the
tape down.
Playing Back Tapes
TAPE
4
Close the cassette holder gently.
5
Press TAPE.
The unit automatically turns on and the source
changes to the tape deck.
• You can select to the tape by pressing TAPE
on the remote control.
6
Press # (play).
The tape starts playing.
• When the end of the tape is reached,
playing stops.
To stop playing, press &/).
To stop playing for a moment, press * (pause).
To resume playing, press * again.
To fast forward or rewind the tape, press
⁄ or !.
• The tape stops at the end of the fast
forwarding or rewinding. To release the
locked button, press &/).
To remove the cassette, press &/) while
playback is stopped.
• DO NOT turn off the unit while playing back or
recording a tape. The cassette deck or tapes
may be damaged.
• The use of C-120 or longer tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch
rollers and the capstans.
• This unit is not compatible with type II and type
IV tapes.
UX-H10[UW]tape.p65 03.6.27, 1:37 PM15