JVC LVT1348-002A Stereo System User Manual


 
30
English
Timer Operations
Setting the Daily Timer
Using Daily Timer, you can wake up with your favorite
music.
You can store three Daily Timer settings; however, you can
activate only one of the timers at a time.
To exit from the timer setting, press CLOCK/TIMER as
required.
To correct a misentry during the process, press CANCEL.
You can return to the previous step.
1
Select one of the timer setting modes you want to set—
Daily 1 ON time, Daily 2 ON time, or Daily 3 ON time.
When the clock has not been adjusted, pressing
CLOCK/TIMER makes the System enter the clock
setting mode.
2
Make the timer setting as you want.
Repeat the following operations until you finish setting in
the following order—
1
Set the hour then the minute for on-time.
2
Set the hour then the minute for off-time.
3
Select the playback source—“TUNER FM,”
“TUNER AM,” “DISC,” or “AUX.”
4
For “TUNER FM” and “TUNER AM”: Select a
preset channel (see page 11).
Select “FM --” or “AM --” for the last selected
station.
For “DISC”:
Select the disc number, group
number, then the track number (see page 12).
Select “DISC -” for the last selected disc tray
number.
For “AUX”:
Connect the other equipment (see
page 14).
CANCEL
AUDIO
CLOCK/
TIMER
SET
2
,
3
Remote control
Remote
ONLY
DAILY 1
ON (Time) ON (Time) ON (Time)
DAILY 2
DAILY 3
Clock setting
(see page 17)
Canceled
Daily 1 Timer Daily 2 Timer Daily 3 Timer
Ex.: When Daily Timer 1 setting mode is selected
FS-GD7[C]_EN.book Page 30 Thursday, March 10, 2005 9:43 AM