Filter
Top Products
10
English Basic Operations
Basic Operations
Basic Operations
About this manual
• This manual explains the operations
assuming that you will use the remote con-
trol. Some buttons on the main unit are the
same as those on the remote control. You
can use either button in this case.
• Some diagrams in this manual are simpli-
fied or exaggerated for the purpose of
explanation.
• You can operate some functions differently
from the explanation given in this manual.
You can set the clock while the main unit is turned
either on or off.
Example: To set the clock to 10:10 a.m.
1 Press .
2 Set the hour.
Back Next
• Holding down the button causes the hour to
increment.
• You can use the number buttons to specify
the hour.
Refer to "Using the number buttons" shown
below.
3 Press .
• To return to step 2, press .
4 Set the minute in the same manner
as steps 2 and 3.
Press four times to display the clock, and then
adjust the clock starting from step 2.
Press repeatedly.
NOTE
• The time display on the main unit is a 24-hour
clock.
• The clock will gain or lose approximately 1
minute per month.
• Set the clock again after you have disconnected
the power plug or a power cut has occurred.
Examples:3:
13: →
20: →
23: → →
Setting the Clock
Number buttons
Adjusting the clock
Displaying the clock while using the
main unit
Using the number buttons
UX-Q1[UB].book 10 ページ ２００４年７月２１日 水曜日 午後１時４４分