Filter
Top Products
7
Getting Started
Connecting the Speakers (SP-FSX1/SP-FSX3)
These speakers are exclusively for this system. Using with other devices will damage the speakers.
Connect the speaker cords between the speaker terminals of the Unit and those of the Speakers.
• When inserting the speaker wire lead, open the speaker terminal.
• Connect the black cord to the ( - ) terminal and the cord without a black line to the (+) terminal.
• Since both speakers are the same, you can put either one to the right or left side.
• Do not connect other speakers to the Unit. The difference of the load impedance causes failures.
• Do not use the supplied speakers in parallel with other speakers.
CAUTION:
• A TV may display irregular colors if located near the speakers. If this happens, set the speak-
ers away from the TV.
BLACK
BLACK
BLACK
BLACK
Right side (rear view)
Left side (rear view)
BLACK
BLACK BLACK
BLACK
(on the side panel)
SPEAKER terminal description
(on the side panel)
SPEAKER terminal description
SP-FSX1
SP-FSX3
SP-FSX1
SP-FSX3
FS-X1-3(B)_E.book Page 7 Friday, March 28, 2003 2:55 PM